# {EDGE} Utilitech Wireless Indoor Siren Model TSE07-1 pared as switch **URL:** \ **Category:** Developer Programs\ **Created:** [February 19, 2022, 12:42am UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758 "2022-02-19T00:42:34Z")\ **Posts on this page:** 19\ **Page:** 1
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [February 19, 2022, 12:42am UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/1 "2022-02-19T00:42:34Z")
I tied to pair my Utilitech Wireless Indoor Siren Model TSE07-1 with the stock “Z-wave Siren” Edge Drive, but instead it paired with the stock Edge “Z-wave switch” driver. The problem is that since I am using the stock Edge “Z-wave switch” driver for a number of switches I can not delete so that I can pair the siren with the old groovy DTH. The finger print is: zw:F type:1000 mfr:0060 prod:000C model:0001 ver:1.00 zwv:2.64 lib:06 cc:20,25,86,80,85,72,71 My temporary solution was to use automations to link the switch with a virtual alarm and link the virtual alarm to STHM. ---
**Author:** ![nayelyz](https://avatars.discourse-cdn.com/v4/letter/n/59ef9b/32.png) [@nayelyz](https://community.smartthings.com/u/nayelyz)\ **Post date:** [February 21, 2022, 11:13pm UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/2 "2022-02-21T23:13:33Z")
Hi, @Paul_Oliver! Yes, it seems that fingerprint is not added to the `Z-Wave Siren` driver yet and the `Z-Wave switch` driver has a generic fingerprint that takes on the device. However, there are two things you can do: 1. Copy the stock DTH and paste it into your [IDE account](https://graph-na04-useast2.api.smartthings.com/). Custom DTHs come before drivers when you join the device. 2. Download the “Z-wave Siren” driver and add the missing fingerprint, then, even if it’s joined to “Z-Wave switch”, you can use the tool in the app to change the driver of the device. The difference between them is that #1 will make the device run in the Cloud. These alternatives are so you can continue using your devices, in the meantime, I will ask the team why the fingerprint is missing. ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [February 22, 2022, 12:40am UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/3 "2022-02-22T00:40:38Z")
@nayelyz Thanks for replying. Option 1 is very easy to do. I should have thought of that one myself. In addition after installing and pairing with the custom DTH, I should be able to switch back to the stock DTH for local control. Option 2 looks very interesting, but is currently beyond my skills. I have been using Edge Drivers and the CLI for months, but have never modified a driver. When I go to GitHub I see there are a number of files for each Edge Driver including one called fingerprints.yml. I could download load it and add the fingerprint, but I have no idea what to do after that. Is there some sort of “Dummies” guide for adding fingerprints to Edge Drivers? Thanks again for your reply, and option one will work at least temporarily. ---
**Author:** ![philh30](https://avatars.discourse-cdn.com/v4/letter/p/41988e/32.png) [@philh30](https://community.smartthings.com/u/philh30)\ **Post date:** [February 22, 2022, 12:51am UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/4 "2022-02-22T00:51:36Z")
> [@Paul\_Oliver](#): > > When I go to GitHub I see there are a number of files for each Edge Driver including one called fingerprints.yml. I could download load it and add the fingerprint, but I have no idea what to do after that. It’s not much more than that. Make sure you download the entire zwave-siren folder and preserve the folder structure. After adding your fingerprint, you would follow the steps in the tutorial below in the “Uploading Your Driver to SmartThings” section. > [@Tutorial | Creating Drivers for Z-Wave Devices with SmartThings Edge](https://community.smartthings.com/t/creating-drivers-for-z-wave-devices-with-smartthings-edge/229503): > > Creating Drivers for Z-Wave Devices with SmartThings Edge ​ SmartThings Edge is our new architecture for Hub Connected devices that uses Device Drivers to execute commands locally on SmartThings Hubs. In this tutorial you will learn how to create a SmartThings Edge Driver for a Z-Wave device - the [Aeotec Z-Wave MultiSensor 6](https://github.com/SmartThingsDevelopers/SampleDrivers/tree/main/aeotec-multisensor). Prerequisites Samsung Account Any version SmartThings Hub with firmware version 38.x or greater Set up the SmartThings CLI according to the [usage section](https://github.com/SmartThingsCommunity/smartthings-cli#usage) in the repository. You will be using the CLI to interact with and publish drivers. If you need instructions on installing the CLI you can find them here [Install CLI Tutorial Link]. ​ Edge Drivers are written in Lua, an easy-to-use scripting language. If you are not familiar with Lua, here are some good resour… ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [February 22, 2022, 12:57am UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/5 "2022-02-22T00:57:57Z")
Thanks @philh30 I would like to learn how to do this. Then I would not have to bug other people like you and @Mariano_Colmenarejo to add fingerprints for me. ---
**Author:** ![philh30](https://avatars.discourse-cdn.com/v4/letter/p/41988e/32.png) [@philh30](https://community.smartthings.com/u/philh30)\ **Post date:** [February 22, 2022, 1:11am UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/6 "2022-02-22T01:11:52Z")
Give it a try. Post if you hit a roadblock and you’ll get plenty of help. ---
**Author:** ![Mariano\_Colmenarejo](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/mariano_colmenarejo/32/220132_2.png) [@Mariano\_Colmenarejo](https://community.smartthings.com/u/Mariano_Colmenarejo)\ **Post date:** [February 23, 2022, 5:42pm UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/7 "2022-02-23T17:42:39Z")
> [@Paul\_Oliver](#): > > I would like to learn how to do this. Then I would not have to bug other people If you have any questions, ask, sure you’ll get help. I don’t know if this tutorial can also help you > [@Setting Up Edge Development Environment](https://community.smartthings.com/t/setting-up-edge-development-environment/238462/9): > > @Jake_Mohl, I don’t know exactly where you are, but I’ll try to explain how I did it How to edit the LUA and yml code of the Edge drivers I’m going to explain the steps I did, that I’m not a developer and I started from scratch, without knowing the CLI or Lua. First I read the Edge Drivers tutorials and CLI in the community Download a multilanguage code editor, I opted for Visual Studio since they recommended it in some thread of the tutorials. [Visual Studio: IDE y Editor de código para desarrolladores de software y Teams](https://visualstudio.microsoft.com/es/) Once installed, the Windows version in my case, this window appears Click on extensions to install the extensions to work with the LUA language, with syntax fixes and programming errors. With these that you see are enough for me ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [February 24, 2022, 4:21am UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/8 "2022-02-24T04:21:06Z")
Well with a lot trial and error I have a working driver for my Utilitech Siren. The battery level is not reporting, but I have seen that before, so I will check again tomorrow to see if it is working. Thank you @philh30 and @Mariano_Colmenarejo for your help. ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [February 24, 2022, 8:03pm UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/9 "2022-02-24T20:03:26Z")
I made another change this afternoon and got battery reporting to work. ---
**Author:** ![dusanhauko](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/dusanhauko/32/136517_2.png) [@dusanhauko](https://community.smartthings.com/u/dusanhauko)\ **Post date:** [March 5, 2022, 1:08pm UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/10 "2022-03-05T13:08:49Z")
Hello So you have working edge driver for your siren? 🙂 Can we add please NEO Coolcam zwave Siren? Data: zw:F type:1005 mfr:0258 prod:0003 model:1088 ver:2.94 zwv:4.38 lib:06 cc:5E,86,72,5A,73,70,85,59,25,71,87,80 Dusan ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [March 5, 2022, 2:46pm UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/11 "2022-03-05T14:46:13Z")
I can add the fingerprint but I don’t have the device or any coding skills to debug any problems. My driver is very basic. On/Off and battery. They is no way to change tones or volume. Doesn’t sound like it would work right for the Neo ---
**Author:** ![dusanhauko](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/dusanhauko/32/136517_2.png) [@dusanhauko](https://community.smartthings.com/u/dusanhauko)\ **Post date:** [March 5, 2022, 2:53pm UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/12 "2022-03-05T14:53:58Z")
Ah then leave it for now. I’ll stick to the driver i allready have. Tnx ---
**Author:** ![ktdt00](https://avatars.discourse-cdn.com/v4/letter/k/43a26b/32.png) [@ktdt00](https://community.smartthings.com/u/ktdt00)\ **Post date:** [September 18, 2022, 4:43pm UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/13 "2022-09-18T16:43:56Z")
I also have this siren and am attempting to switch it to the new architecture. It appears as though the fingerprint is now in the “production z-wave siren” edge driver. I have removed the device but when I re-pair it, I think it is re-pairing with the legacy DTH (doesn’t show “placeholder” in the legacy API UI and doesn’t have a “Driver” choice in the Android app). I may be operating on an incorrect assumption but I thought that all production edge drivers were automatically installed to my hub and that re-pairing a device fingerprinted in production would correctly choose the edge driver over the legacy driver? Is that right or do I need to manually install the production z-wave driver to my hub before repairing. Thanks!! ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [September 18, 2022, 5:09pm UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/14 "2022-09-18T17:09:36Z")
Go to your hub device in the phone app. Click on the 3 dots in upper right corner and select drivers. It will list all drivers installed on your hub. If the driver is not there you should be able to install it from the beta site. ---
**Author:** ![ktdt00](https://avatars.discourse-cdn.com/v4/letter/k/43a26b/32.png) [@ktdt00](https://community.smartthings.com/u/ktdt00)\ **Post date:** [September 18, 2022, 5:20pm UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/15 "2022-09-18T17:20:35Z")
Thank You Paul! So I did that… and it worked… but was my assumption wrong that it should have automatically found and used the production driver since the fingerprint is already in production? Thanks again!! ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [September 18, 2022, 5:23pm UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/16 "2022-09-18T17:23:32Z")
I am not sure. But at this point I think the production drivers are only automatic for those in the Beta firmware program. ---
**Author:** ![msazone](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/msazone/32/81229_2.png) [@msazone](https://community.smartthings.com/u/msazone)\ **Post date:** [December 9, 2022, 4:41pm UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/17 "2022-12-09T16:41:19Z")
Did you get the driver from [Channel and Drivers Web UI](https://callaway.smartthings.com/channels/b1373fea-da9b-434b-b674-6694ce5d08cc?status=accepted) that is listed as Z-Wave Siren? I have the same siren. Does that edge driver currently support this siren? Thank you ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [December 9, 2022, 4:52pm UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/18 "2022-12-09T16:52:02Z")
Last Feb. I downloaded the ST Beta Z-Wave Siren Edge Driver and added the fingerprint for my Siren. And it works just fine. Today I checked and I am able to switch to ST Beta Edge driver, so it looks like you should be able to use that driver. ---
**Author:** ![msazone](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/msazone/32/81229_2.png) [@msazone](https://community.smartthings.com/u/msazone)\ **Post date:** [December 9, 2022, 5:27pm UTC](https://community.smartthings.com/t/edge-utilitech-wireless-indoor-siren-model-tse07-1-pared-as-switch/239758/19 "2022-12-09T17:27:29Z")
Thank you so much!!