# \[Edge\] Matter Playground

**URL:** <https://community.smartthings.com/t/edge-matter-playground/302480>\
**Category:** Community Created Drivers\
**Tags:** edge-device, edge\_lighting, matter, smart-plug\
**Created:** [July 1, 2025, 4:51pm UTC](https://community.smartthings.com/t/edge-matter-playground/302480 "2025-07-01T16:51:45Z")\
**Posts on this page:** 1\
**Showing post:** 99

<div class="post-metadata">

**Author:** ![mocelet](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/mocelet/32/195631_2.png) [@mocelet](https://community.smartthings.com/u/mocelet)\
**Post date:** [December 16, 2025, 10:00am UTC](https://community.smartthings.com/t/edge-matter-playground/302480/99 "2025-12-16T10:00:24Z")

</div>

> [@SeanTek](#):
>
> There is still a lag in the functions I want: Toggle On/Off

If toggling on/off has lag that’s because the buttons support multi-press and have to wait to confirm it’s not a double-tap. Check if these options help:

> [@\[Edge\] Unlock IKEA BILRESA scroll wheel and dual button](https://community.smartthings.com/t/edge-unlock-ikea-bilresa-scroll-wheel-and-dual-button/306761/15):
>
> Minimize action latency in BILRESA. Available from version 2025-12-15 Sometimes you just want to turn on a light and want it wall-switch fast, not half a second later. If you don’t care it’s better that you don’t try these new options, there’s no going back when you notice the difference rofl. This is the story of a single-press in BILRESA told in Matter events, from when you press the button (Initial Press), release the finger (Short Release) around 100 ms later and the device reports it’s a single-press (Multipress Complete) around half a second later. The driver now allows to expose both the Initial Press and the Short Release for both models if you want to favour speed over double/triple tap. Initial Press is the fastest but will trigger with a lon…

Having said that, the Aeotec V3 is slow, that’s a fact. The V4 is a 70% faster which doesn’t look like a huge improvement.

The best way to control lights with buttons in a smooth way is Matter bindings as commented in other posts, but so far there’s not much in the market and I’m not aware of any wireless remote that allows that.

---

_[View the full topic](https://community.smartthings.com/t/edge-matter-playground/302480)._
