(EDGE Driver-Mc): Zigbee Drivers for Motion, Open/Close, Moisture, Smoke-Co Sensors and others Devices

I did this driver a couple of weeks ago and it is posted on the channel.

I’m going to put them on the list, which I think I forgot

ST Zigbee Button Test

OK! This is not updating the status when physically activated on the device. Pressing the app works, but pressing the device doesn’t change the status in the app

Hello is the drive you created for this one? For I don’t recognize.

Zigbee node type : router
Application 17
Endpoint 01
Manufacture: Heiman
Model: Warning device EF-3.0
Raw:01 0104 0403 01 07 0000 0001 0003 0004 0500 0502 0B05 01 0019

Heiman Smart Siren
Model HS2WD-E

@Mariano_Colmenarejo

could you tell me if it is possible to create a drive to make a connection with nodered? I use nodered with ST through smartapp connected to an orangepi. Would something like this (lan connection) be feasible to control this?

I don’t know where he got that model data from, it’s different from the one I created.
They must by identical

you have to get the device model and manufacturer in IDE
in Driver: I don’t know where he got that model data from, it’s different from the one I created.

you have to get the device model and manufacturer in IDE

your model : Warning device EF-3.0
driver model : WarningDevice-EF-3.0

  - id : Heiman/WarningDevice-EF-3.0
    deviceLabel : HEIMAN Siren
    manufacturer : Heiman
    model : WarningDevice-EF-3.0
    deviceProfileName : switch-alarm

Sorry, I can’t help you on this.
I do not have the necessary knowledge on this subject

the button appeared… but with many options… and it’s only 3, but it worked fine

you’re already helping a lot… I just have to thank you for what you’re doing for the community

1 Like

added to this driver data version.
Try it

β”Œβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”
β”‚ Name        β”‚ Zigbee Siren Mc                      β”‚
β”‚ Version     β”‚ 2021-12-20T17:23:12.088109           β”‚
β””β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”˜
  - id : Heiman/Warning device EF-3.0
    deviceLabel : HEIMAN Siren
    manufacturer : Heiman
    model : Warning device EF-3.0
    deviceProfileName : switch-alarm

@Mariano_Colmenarejo

I have this Zemismart button. It has 12 commands being pushed, held and double for each button. Do you think it’s possible to create a driver for it?

  • application: 43
  • endpointId: 01
  • manufacturer: _TZ3000_vp6clf9d
  • model: TS0044
  • zigbeeNodeType: SLEEPY_END_DEVICE

01 0104 0000 01 03 0000 0001 0006 02 0019 000A

Multiple buttons I do not handle well.

No two buttons are the same and each one has its own peculiarities.

There are developers in the community who are making drivers for multiple buttons or maybe they can adapt the Beta driver stock zigbee button

@niquini you’ve used up your quota of requests on this topic, now you need to wait a week, have a chill pill and a wonderful Christmas :christmas_tree:

1 Like

kkkkkkk
I still have some models here :joy::joy::joy:

1 Like

@Mariano_Colmenarejo can you please add another water leak sensor ADT SmartThings

Data

  • application: 04
  • endpointId: 01
  • firmwareFullVersion: 00000004
  • firmwareImageType: 4407
  • firmwareManufacturerCode: 4490
  • manufacturer: Nortek Security and Control
  • model: F-ADT-WTR-1
  • zigbeeNodeType: SLEEPY_END_DEVICE

Raw Description
01 0104 0402 00 0A 0000 0001 0002 0003 0020 0402 0500 0B05 FC01 FC02 01 0019

Siren

@Araken1, @Williannhenrique,

fixed HEIMAN instead Heiman

β”Œβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”
β”‚ Name        β”‚ Zigbee Siren Mc                      β”‚
β”‚ Version     β”‚ 2021-12-20T19:00:11.729098           β”‚
β””β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”˜
  - id : Heiman/WarningDevice-EF-3.0
    deviceLabel : HEIMAN Siren
    manufacturer : HEIMAN
    model : WarningDevice-EF-3.0
    deviceProfileName : switch-alarm

Sorry I don’t know how to do this.

Uninstall the device with the app
Install the driver on your hub from the channel
Put the sensor in pairing mode
In the app add device and search nearby

Ok. Thanks

@Mariano_Colmenarejo

Is there a drive to cover?

Zemismart

  • zigbeeNodeType: ROUTER
  • application: 52
  • endpointId: 01
  • manufacturer: _TZE200_wmcdj3aq
  • model: TS0601

01 0104 0051 00 05 0000 000A 0004 0005 EF00 01 0019