(EDGE Driver-Mc): Z-Wave Edge Drivers and others with FIBARO devices:

Would you consider adding Fibaro smart implant FGBS-222

Raw Description zw:Ls2a type:0701 mfr:010F prod:0502 model:1000 ver:5.02 zwv:6.02 lib:03 cc:5E,55,98,9F,56,6C,22 sec:25,85,8E,59,86,72,5A,73,5B,31,60,70,71,75,7A epc:7

Hi @Pamaliska

There is a beta driver published for this device.
I do not known and have not this device.

Hi there
We did try on quite a few FGS-223 and only one came up. could you please just give me the steps? There is obviously something I did not get…

Hi, Mariano! Thanks for your work! I tried to use your driver Z-Wave Switch and Childs Mc for Zwave NeoQulcam multi-switch (2 gang) and found the following issues: both stickers only turn on\off the main switch. Switch1 changes on and off on the sticker, but only the main switch on the device turns on\off. Can u fix it? Thanks!

Hi @Dimik586

I need details of fingerprints of device to see what subdriver use

@rowschank

I moved to this thread
5m

Switch, double switch and dimmer added to this driver version. Try if works fine

───────────────────────────────────────────────────
 Name         Z-Wave Switch and Child Mc
 Version      2022-11-23T10:59:25.696680643        
───────────────────────────────────────────────────
  - id: TechniSat ZM5101/Switch
    deviceLabel: TechniSat ZM5101 Switch
    manufacturerId: 0x0299
    productType: 0x0002
    productId: 0x1A90
    deviceProfileName: metering-plug
  - id: TechniSat ZM5101/Double-Switch
    deviceLabel: TechniSat ZM5101 Double-Switch
    manufacturerId: 0x0299
    productType: 0x0003
    productId: 0x1A91
    deviceProfileName: dual-metering-switch
  - id: TechniSat ZM5101/Dimmer
    deviceLabel: TechniSat ZM5101 Dimmer
    manufacturerId: 0x0299
    productType: 0x0004
    productId: 0x1A92
    deviceProfileName: metering-dimmer

Window covering added to this driver version

───────────────────────────────────────────────────
 Name         Z-Wave Window Treatment Mc
 Version      2022-11-23T11:02:40.193457636        
───────────────────────────────────────────────────
  - id: TechniSat ZM5101/Blind
    deviceLabel: TechniSat ZM5101
    manufacturerId: 0x0299
    productType: 0x0005
    productId: 0x1A93
    deviceProfileName: window-treatment-power

Hi @Kimmo_Liias

I moved to this thread that is for zwave devices

Hi @Kimmo_Liias

Your device would never be linked with those fingerprints and if linked with them it would see a double-switch profile.

I still don’t understand how it pairs with the stock zwave switch driver without the fingerprints.
There is no profile with power and energy for fingerprints c.c. generic.
There is no profile without Switch capability and with Power and energy

I don’t understand anything that happens to this device

The DTH you refer to is the official Aeotec DTH, I think this driver should be converted to the official page or channel of Aeotec.
It sends a specific configuration to the device.
I’m going to put it, as a favor.
uninstall and reinstall device with new vesion.
If it doesn’t work, please send all this information to Aeotec and have them fix it, which is aeotec responsibility as a manufacturer and partner of smartthings

───────────────────────────────────────────────────
 Name         Z-Wave Switch and Child Mc
 Version      2022-11-25T11:22:27.749682185        
───────────────────────────────────────────────────

They work. The basic functions are fine, the blinds work fine.

The extra settings (reporting periods, switch modes, etc.) are obviously gone, but I rarely used them so it’s fine. But it’s unfortunate, because the hardware is really good.

Hi @rowschank

You can use Z-Wave Device Config Mc to configure the parameters according to device manual.

Preform a driver change to Z-Wave Device Config Mc then do the configuration ad return to the original driver.

Now there is a problem when you change to this driver, all routines for this device are deleted. I hope will fix soon.

Hi Mariano, do you have the chance to include in your driver edge Z-Wave Siren MC also the Aeotec Siren Gen 5? Thanks

Hi @D4nny84

This siren is in stock Z-Wave Siren
I have one siren that migrated to stock driver some time ago

Do you mean the Smarthings repository ( SmartThings Drivers (Beta))?

In the smartthings Beta Channel
https://api.smartthings.com/invitation-web/accept?id=450930c1-02a6-43d8-adaa-4cbc51027956

I have the Z-Wave Edge driver installed but unfortunately the Siren doesn’t capture the Edge driver…what do you do suggest me to do?

Check the fingerprints of your device

could you please remember me how to check it? Thanks a lot!!!

Install Z-Wave Thing Mc and try pair device.
Capture and send data

I tried again and this is what Hub found it

It has been paired with nothing in particular

This usually happens to me when the device is very far from the hub