# Ecolink tilt sensor showing as open/close sensor

**URL:** <https://community.smartthings.com/t/ecolink-tilt-sensor-showing-as-open-close-sensor/18796>\
**Category:** Connected Things\
**Created:** [July 5, 2015, 9:57pm UTC](https://community.smartthings.com/t/ecolink-tilt-sensor-showing-as-open-close-sensor/18796 "2015-07-05T21:57:03Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Eagle72069](https://avatars.discourse-cdn.com/v4/letter/e/b38774/32.png) [@Eagle72069](https://community.smartthings.com/u/Eagle72069)\
**Post date:** [July 5, 2015, 9:57pm UTC](https://community.smartthings.com/t/ecolink-tilt-sensor-showing-as-open-close-sensor/18796/1 "2015-07-05T21:57:03Z")

</div>

Is there a way to get the sensor to show as a garage tilt sensor instead of just open close sensor?

---

<div class="post-metadata">

**Author:** ![ashutosh1982](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ashutosh1982/32/15210_2.png) [@ashutosh1982](https://community.smartthings.com/u/ashutosh1982)\
**Post date:** [July 6, 2015, 2:12am UTC](https://community.smartthings.com/t/ecolink-tilt-sensor-showing-as-open-close-sensor/18796/2 "2015-07-06T02:12:27Z")

</div>

That is correct. It shows as open close sensor. By changing its type it wont change the purpose… Its still going to show whether your garage is open or close.

---

<div class="post-metadata">

**Author:** ![Eagle72069](https://avatars.discourse-cdn.com/v4/letter/e/b38774/32.png) [@Eagle72069](https://community.smartthings.com/u/Eagle72069)\
**Post date:** [July 6, 2015, 2:23am UTC](https://community.smartthings.com/t/ecolink-tilt-sensor-showing-as-open-close-sensor/18796/3 "2015-07-06T02:23:34Z")

</div>

Ok maybe I should have said change the icon so it represents a garage. Sorry I was camping all weekend

---

<div class="post-metadata">

**Author:** ![ashutosh1982](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ashutosh1982/32/15210_2.png) [@ashutosh1982](https://community.smartthings.com/u/ashutosh1982)\
**Post date:** [July 6, 2015, 4:49am UTC](https://community.smartthings.com/t/ecolink-tilt-sensor-showing-as-open-close-sensor/18796/4 "2015-07-06T04:49:52Z")

</div>

If that really matters to you, then you can change it in the device type in the ide. You need to copy paste the open/close sensor device type and create a new device type- in that just change the image that it calls to show open close …

---

<div class="post-metadata">

**Author:** ![slagle](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/slagle/32/16950_2.png) [@slagle](https://community.smartthings.com/u/slagle)\
**Post date:** [July 6, 2015, 3:29pm UTC](https://community.smartthings.com/t/ecolink-tilt-sensor-showing-as-open-close-sensor/18796/5 "2015-07-06T15:29:25Z")

</div>

Good morning!

You can setup the device to be apart of a Garage solution in the “Doors and Locks” category.

On the dashboard hit the “+” icon\>Alerts\>Access and Entryways…

The top option here should be “Notify me when a door is opening and/or closed while I am away from home”. Next under “Type of Door” select garage door. If i understood the question correctly, this should get you to where you want I believe.
