# Ecobee3 again

**URL:** <https://community.smartthings.com/t/ecobee3-again/51324>\
**Category:** Automation Ideas\
**Created:** [June 26, 2016, 3:21am UTC](https://community.smartthings.com/t/ecobee3-again/51324 "2016-06-26T03:21:01Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![stn](https://avatars.discourse-cdn.com/v4/letter/s/df788c/32.png) [@stn](https://community.smartthings.com/u/stn)\
**Post date:** [June 26, 2016, 3:21am UTC](https://community.smartthings.com/t/ecobee3-again/51324/1 "2016-06-26T03:21:01Z")

</div>

Starting to play with HA and ST and bought a ecobee3 and successfully added the ST device. But can’t figure out how could I set up so that everyone has left home (presence defined through phones), ST sets the thermostat to Away mode and when anyone returns sets it to Home mode. The more I read the threads, the more I get confused. Looks like I might need to buy community device handler. Can someone please clarify and help here…

Thanks in advance.

---

<div class="post-metadata">

**Author:** ![carmp3fan](https://avatars.discourse-cdn.com/v4/letter/c/ea5d25/32.png) [@carmp3fan](https://community.smartthings.com/u/carmp3fan)\
**Post date:** [June 26, 2016, 4:44am UTC](https://community.smartthings.com/t/ecobee3-again/51324/2 "2016-06-26T04:44:43Z")

</div>

There are a couple of ways to do it. @StrykerSKS has some Ecobee devices available at [https://github.com/StrykerSKS/SmartThingsPublic/tree/master/devicetypes/smartthings](https://github.com/StrykerSKS/SmartThingsPublic/tree/master/devicetypes/smartthings) under ecobee-thermostat and ecobee-sensor. If you combine that with CoRE, you can change it the program and resume the program.

I currently have a virtual switch that gets turned on and off when everyone is gone or someone arrives. I then use IFTTT to change to away or resume based on the switch status.

---

<div class="post-metadata">

**Author:** ![yvesracine](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/yvesracine/32/95271_2.png) [@yvesracine](https://community.smartthings.com/u/yvesracine)\
**Post date:** [June 26, 2016, 11:56am UTC](https://community.smartthings.com/t/ecobee3-again/51324/3 "2016-06-26T11:56:18Z")

</div>

Hi @stn,

If you want to avoid using some complex or external apps (which introduce unnecessary delays) to do a simple thing such as setting your thermostat away or present, then you need My Ecobee device which has been around for more than 2 years and it’s reliable…There are a lot of smartapps that you can use with my Ecobee device; in fact, there is no other ecobee implementation that gives you so much features.

> <https://github.com/yracine/device-type.myecobee/tree/master/smartapps>
>
> //github.com/yracine/device-type.myecobee/tree/master/smartapps

As your requirements grow, you will be then able to use more smartapps at my github for more complex scenarios. So, myEcobee device can really grow with you…

**For example, the ecobee3’s smart away and follow me features are proprietary. With MyEcobee device, you can use any ST connected temp and motion sensors to do similar features and with faster response times (setting your thermostat to away in 5 minutes instead of a minimum of 30 minutes with ecobee’s smart away).**

See this thread for more details:

> [@\[OBSOLETE\] Would you like to use any ST connected temp & motion sensors with Ecobee?](https://community.smartthings.com/t/release-would-you-like-to-use-any-st-connected-temp-motion-sensors-with-ecobee/49044):
>
> To whom it may concern, For those of you who have an ecobee thermostat and would like to use ANY ST connected temp & motion sensors to average out your setpoints based on all temp sensors. There is an app for that! It’s called MonitorAndSetEcobeeTemp and it’s available now at my github: [device-type.myecobee/smartapps at master · yracine/device-type.myecobee · GitHub](https://github.com/yracine/device-type.myecobee/tree/master/smartapps) Prerequisites: Ecobee thermostat controlled via ST by MyEcobee device (all models supported: Smart thermostat, ecobee 4, ecobee Lite, ecobee3, Smart-SI, Smart-02, and even EMS) Temperature Sensors in your rooms (optional) : for optimal cooling/heating setpoints Motion sensors (optional): to detect if your house is occupied Climates/Programs set at ecobee portal ST WeatherStation such as this one (optional): [GitHub - yra…](https://github.com/yracine/device-type.weatherstation)

**_P.S. When you buy an ecobee3 thermostat for more than $200, a mere $20 to get all ecobee’s API rich features is not much. MyEcobee device can really turn your ecobee thermostat to a smart thermostat when exposed to ST and unlock ALL features._**

**Another example: if you plan to add Keen Home smart vents later, My Ecobee device is even more useful as my Zoned Heating/Cooling solutions orchestrate ecobee3’s with the vents for optimal comfort and energy efficiency.**

> [@\*\*\* No longer supported \*\*\* \[RELEASE\] Best Zoned Heating/Cooling smartapps](https://community.smartthings.com/t/release-new-version-of-my-zoned-heating-cooling-solutions-smart-vents/38349):
>
> To whom it may concern, My smartapps are now officially approved by Keen Home: [image] The new UI presentation amongst others adds a custom capability (setZoneSetpoint see image below). Latest versions of the smartapps [EcobeeSetZoneWithScheduleV9, ScheduleTstatV9, ScheduleRoomTempControlV5: new major version with added custom capability in MyVirtualZone DTH for Setting Zone setpoint under the new Samsung connect app!](https://community.smartthings.com/t/release-best-zoned-heating-cooling-solutions-for-smartthings/38349/250)[V8.8.9 EcobeeSetZoneWithSchedule & v8.8.9 ScheduleTstatZones added some defensive coding to avoid conflict when the master tstat is also included in rooms (as a slave tstat) for the scheduled zones](https://community.smartthings.com/t/release-best-zoned-heating-cooling-solutions-for-smartthings/38349/245)[v8.8.8 ecobeeSetZoneWithSchedule & v8.8.7 ScheduleTstatZones v8.8.7 - Removed some logic i…](https://community.smartthings.com/t/release-best-zoned-heating-cooling-solutions-for-smartthings/38349/244)

---

<div class="post-metadata">

**Author:** ![stn](https://avatars.discourse-cdn.com/v4/letter/s/df788c/32.png) [@stn](https://community.smartthings.com/u/stn)\
**Post date:** [June 26, 2016, 12:26pm UTC](https://community.smartthings.com/t/ecobee3-again/51324/4 "2016-06-26T12:26:23Z")

</div>

Thanks guys, let me take a look at both options and I will get back with further questions.

---

<div class="post-metadata">

**Author:** ![yvesracine](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/yvesracine/32/95271_2.png) [@yvesracine](https://community.smartthings.com/u/yvesracine)\
**Post date:** [June 26, 2016, 12:41pm UTC](https://community.smartthings.com/t/ecobee3-again/51324/5 "2016-06-26T12:41:55Z")

</div>

And, as a bonus, you can also use groveStreams to map your daily HVAC stats in a graph like this one:

EDIT, good link with API key:

[https://grovestreams.com/singleDash.html?itemUid=7b9238f5-56e4-3da0-9005-0f93e00904cc&org=bb912646-8c3f-3f9c-9b47-0a1cdd03594f&api\_key=f7aec117-da78-3a53-9843-4fbed81f0b3c](https://grovestreams.com/singleDash.html?itemUid=7b9238f5-56e4-3da0-9005-0f93e00904cc&org=bb912646-8c3f-3f9c-9b47-0a1cdd03594f&api_key=f7aec117-da78-3a53-9843-4fbed81f0b3c)

Regards.

---

<div class="post-metadata">

**Author:** ![yvesracine](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/yvesracine/32/95271_2.png) [@yvesracine](https://community.smartthings.com/u/yvesracine)\
**Post date:** [June 26, 2016, 2:13pm UTC](https://community.smartthings.com/t/ecobee3-again/51324/6 "2016-06-26T14:13:56Z")

</div>

I edited the groveStream link above with the API key; otherwise groveStreams asks you to log in.

---

<div class="post-metadata">

**Author:** ![stn](https://avatars.discourse-cdn.com/v4/letter/s/df788c/32.png) [@stn](https://community.smartthings.com/u/stn)\
**Post date:** [June 26, 2016, 5:37pm UTC](https://community.smartthings.com/t/ecobee3-again/51324/7 "2016-06-26T17:37:36Z")

</div>

> [@carmp3fan](#):
>
> …  
> I currently have a virtual switch that gets turned on and off when everyone is gone or someone arrives. I then use IFTTT to change to away or resume based on the switch status.

I think this will work for me now. Can you please let me know which virtual switch are you using. @yvesracine, I have looked at your device handler and looks very interesting and feature rich, for now I am only getting my feet wet and as I get more deep into it, will definitely look to buy this.

Thanks

---

<div class="post-metadata">

**Author:** ![carmp3fan](https://avatars.discourse-cdn.com/v4/letter/c/ea5d25/32.png) [@carmp3fan](https://community.smartthings.com/u/carmp3fan)\
**Post date:** [June 26, 2016, 8:53pm UTC](https://community.smartthings.com/t/ecobee3-again/51324/9 "2016-06-26T20:53:53Z")

</div>

> [@stn](#):
>
> Can you please let me know which virtual switch are you using.

I’m just using the standard Simulated Switch. Off/on capability. I call mine Ecobee Away. On for away, and off for home.

---

<div class="post-metadata">

**Author:** ![stn](https://avatars.discourse-cdn.com/v4/letter/s/df788c/32.png) [@stn](https://community.smartthings.com/u/stn)\
**Post date:** [June 28, 2016, 1:42am UTC](https://community.smartthings.com/t/ecobee3-again/51324/10 "2016-06-28T01:42:41Z")

</div>

Thanks. I setup the switch and it is working to trigger IFTTT recipe upon power on or off. However it seems twice today the IFTTT script was not triggered even though the virtual switch was switched on or off. SO will need to watch and if it is unreliable, I might need to go the paid solution.

---

<div class="post-metadata">

**Author:** ![carmp3fan](https://avatars.discourse-cdn.com/v4/letter/c/ea5d25/32.png) [@carmp3fan](https://community.smartthings.com/u/carmp3fan)\
**Post date:** [June 28, 2016, 2:37am UTC](https://community.smartthings.com/t/ecobee3-again/51324/12 "2016-06-28T02:37:10Z")

</div>

The nice thing about a virtual switch is that you can test it manually. Just turn the switch on and off. I can tell you from experience, there is no need to go with the paid version. I’ve had mine running with IFTTT with a success rate of 9/10 or better. In my case the issue is generally related to presence sensors not updating correctly.

With IFTTT, there will likely be a delay, though I rarely experience more than a 1m delay. Since IFTTT polls for changes, it can take 15 minutes or more at times.

I would definitely look at @StrykerSKS Ecobee app if IFTTT doesn’t work as well as you’d like or if you’d like to remove an intermediate service.

---

<div class="post-metadata">

**Author:** ![stn](https://avatars.discourse-cdn.com/v4/letter/s/df788c/32.png) [@stn](https://community.smartthings.com/u/stn)\
**Post date:** [June 28, 2016, 9:10am UTC](https://community.smartthings.com/t/ecobee3-again/51324/13 "2016-06-28T09:10:13Z")

</div>

Thanks, StrykerSKS and carmp3fan. @carmp3fan, yes I did try the virtual switch on and off manually and once there as well the IFTTT script did not trigger. But will see. definitely virtualswitch is great if you want to turn off AC, even if you are home and working outside etc and you can use the switch.

@StrykerSKS, let me try the free version, I wasn’t aware that the free version had the capability to do home/away based on presence sensors.

---

<div class="post-metadata">

**Author:** ![yvesracine](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/yvesracine/32/95271_2.png) [@yvesracine](https://community.smartthings.com/u/yvesracine)\
**Post date:** [June 28, 2016, 11:16am UTC](https://community.smartthings.com/t/ecobee3-again/51324/14 "2016-06-28T11:16:15Z")

</div>

Hi,

**A good implementation starts with a good design.**

No other ecobee implementation can expose so many ecobee API features, as their design limits the features they can expose. In fact, the stock ST device is very limited because of its design,

My design is unique (and has been validated by the SmartThings architects)…There is  
no back and forth between a parent smartapp (which causes performance issues) and the device handler for each feature: the device handler is as independent as possible and can even work without the parent smartapp. The DTH can run without the service manager if needed (can be useful when the ST platform has severe performance and backend issues like back in December). No other ecobee implementation can do that, as their design is too tightly coupled.

**I’ve created many automations and divided them into many smartapps as I want to create as many independent & dedicated services as possible.**

**This way, each “micro service” can be modified & tested independently from each other: this design approach allows faster changes and less ST related platform issues (instead of creating a big smartapp that does everything and requires more maintenance).** This “micro service” approach limits the impact on the end users as well when a change is needed.

**The end users can also pick and choose the automations that they really need to meet their own use cases.**

As a reminder to the rich capabilties of MyEcobee device, here are some use cases (and the related smartapps):

**1) Setting your thermostat to Away or Home based on ST hello modes**

_See the ecobeeChangeMode smartapp._

**2) Resuming your program/climate when you’re back home**

_See the ecobeeResumeProg smartapp._

**3) Setting your thermostat to vacation mode**

_See the ecobeeManageVacation smartapp._

**4) Creating/updating your ecobee climates/schedules**

_See the ecobeeManageClimate smartapp._

**5) Setting your ecobee climate/program at a given time**

_See the ecobeeSetClimate smartapp._

**6) Monitoring and setting your indoor humidity level using your humidifer/dehumidifer/HRV/ERV (when connected** **to ecobee)**

**It also allows you to use the ecobee’s free cooling feature…**

_See the MonitorAndSetEcobeeHumidity smartapp_ and this thread for more details:

> [@\[OBSOLETE\] Would you like to control your Humidifier/Dehumidifier/HRV/ERV with your ecobee thermostat and ST?](https://community.smartthings.com/t/release-would-you-like-to-control-your-humidifier-dehumidifier-hrv-erv-with-your-ecobee-thermostat-and-st/49108):
>
> To whom it may concern, For those of you who have an ecobee thermostat and would like to control your connected Humidifier/Dehumidifier/HRV/ERV. There is an app for that! It’s called MonitorAndSetEcobeeHumidity and it’s available now at my github: [device-type.myecobee/smartapps at master · yracine/device-type.myecobee · GitHub](https://github.com/yracine/device-type.myecobee/tree/master/smartapps) Prerequisites: Ecobee thermostat controlled via ST by MyEcobee device Your Humidifier/Dehumidifier/HRV/ERV connected to ecobee Outdoor Temp/Humidity Sensor or ST WeatherStation such as this one (optional): [GitHub - yracine/device-type.weatherstation: An internet-based weather station device for your Hub (or pre-defined) location.](https://github.com/yracine/device-type.weatherstation) Temperature/Humidity Sensor (optional) for better humidity adjustment The smartapp has been there for a while, but I just did an …

**7) Monitoring and setting your setpoints based on any ST connected indoor temp/motion sensors (similar to ecobee3’s follow me feature) & outdoor temperature**

_See the MonitorAndSetEcobeeTemp smartapp._, and this thread for more details:

> [@\[OBSOLETE\] Would you like to use any ST connected temp & motion sensors with Ecobee?](https://community.smartthings.com/t/release-would-you-like-to-use-any-st-connected-temp-motion-sensors-with-ecobee/49044):
>
> To whom it may concern, For those of you who have an ecobee thermostat and would like to use ANY ST connected temp & motion sensors to average out your setpoints based on all temp sensors. There is an app for that! It’s called MonitorAndSetEcobeeTemp and it’s available now at my github: [device-type.myecobee/smartapps at master · yracine/device-type.myecobee · GitHub](https://github.com/yracine/device-type.myecobee/tree/master/smartapps) Prerequisites: Ecobee thermostat controlled via ST by MyEcobee device (all models supported: Smart thermostat, ecobee 4, ecobee Lite, ecobee3, Smart-SI, Smart-02, and even EMS) Temperature Sensors in your rooms (optional) : for optimal cooling/heating setpoints Motion sensors (optional): to detect if your house is occupied Climates/Programs set at ecobee portal ST WeatherStation such as this one (optional): [GitHub - yra…](https://github.com/yracine/device-type.weatherstation)

**8) Exposing your ecobee3’s remote sensors to SmartThings for HA scenarios**

_See the ecobee3RemoteSensorInit smartapp._

**9) Controlling your smart vents based on your indoor temp/motion sensors in conjunction with your thermostat’s programs & setpoints**

_See the ecobeeSetZoneWithSchedule smartapp_

**10) Controlling your minimum fan time per hour during a climate/schedule run**

_See the ecobeeSetFanMinOnTime smartapp_

**11) Generating some ecobee HVAC stats on a daily basis and sending them to groveStreams for data analytics**

You can then use groveStreams to map your stats on a graph like this one:

> **[Dashboard](https://grovestreams.com/singleDash.html?itemUid=7b9238f5-56e4-3da0-9005-0f93e00904cc&org=bb912646-8c3f-3f9c-9b47-0a1cdd03594f&api_key=f7aec117-da78-3a53-9843-4fbed81f0b3c)**
>
> Dashboard

So, when you get serious about the ST-Ecobee Integration, My Ecobee device is there  
for you. And, it keeps getting better because of its well-built design that can grow with you.

For any further questions about MyEcobee device, send me an email to [services@maisonsecomatiq.com](mailto:services@maisonsecomatiq.com).

**My Smartapps are getting recognized also not only by Ecobee, but by other partners as well: Keen Home Smart Vents just recognized my work recently.**

**The smart vents integration means that you can schedule your ecobee’s setpoints in conjunction with controlling your smart vents.**

**No other implementation out there allows such smart integration for better comfort and energy savings.**

Why settle for less when you can get everything and much more??

See this thread for more details:

> [@\[RELEASE\] My Ecobee Device V4 with thermostat multi-tile UI (pictures below)](https://community.smartthings.com/t/release-my-ecobee-device-v4-with-thermostat-multi-tile-ui-pictures-below/37832):
>
> To whom it may concern, This thread is about My Ecobee device only, and it’s dedicated to the several hundred of ecobee users (550 contributors and counting) who have been using it for their day to day HA interaction through SmartThings for more than 2 years now. I’ve developed more than 15k lines of code for the ecobee thermostats under ST. It’s the most comprehensive ecobee implementation. There is no other thermostat device that offers this kind of capabilities under SmartThings (compared to Nest, Honeywell Lyric or any other smart thermostats). If you want to unlock all ecobee’s rich APIs features, this is the device for you! The code works with all ecobee models: Ecobee3, Smart-SI, Smart-02, and even EMS thermostats. New upcoming version here: BTW, for those who are interes…

Regards.

\_P.S. My design is also better suited for the next generation of ecobee thermostats.  
_In fact, My ecobee device’s design is so versatile that it can run for any ecobee thermostat models: ecobee3, Smart-SI, Smart, EMS, and any upcoming models._

---

<div class="post-metadata">

**Author:** ![ady624](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ady624/32/32610_2.png) [@ady624](https://community.smartthings.com/u/ady624)\
**Post date:** [June 28, 2016, 12:16pm UTC](https://community.smartthings.com/t/ecobee3-again/51324/19 "2016-06-28T12:16:28Z")

</div>

Mine is dumb, but I still managed to connect it to ST. With a link chain. I will definitely know when the bike is not home.

---

<div class="post-metadata">

**Author:** ![ady624](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ady624/32/32610_2.png) [@ady624](https://community.smartthings.com/u/ady624)\
**Post date:** [June 28, 2016, 12:26pm UTC](https://community.smartthings.com/t/ecobee3-again/51324/20 "2016-06-28T12:26:42Z")

</div>

![](https://global.discourse-cdn.com/smartthings/original/3X/8/1/81f6cb4845536694ad96440bb6e572528c83f6a7.jpeg)

---

<div class="post-metadata">

**Author:** ![nathanendress](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/nathanendress/32/26962_2.png) [@nathanendress](https://community.smartthings.com/u/nathanendress)\
**Post date:** [June 28, 2016, 12:34pm UTC](https://community.smartthings.com/t/ecobee3-again/51324/21 "2016-06-28T12:34:29Z")

</div>

OK, sorry to interrupt the snark, but i have a question and i will accept ridicule. Please be gentle. I’ve tried to copy/paste @StrykerSKS code into a new smart app. I get this error. I did paste all 774 lines showing. What did i do wrong?

No signature of method: script1467117130657352888491.metadata() is applicable for argument types: (script1467117130657352888491$\_run\_closure1) values: [script1467117130657352888491$\_run\_closure1@3bea83b3] Possible solutions: getMetadata(), getState(), setState(java.lang.Object), metaClass(groovy.lang.Closure)

---

<div class="post-metadata">

**Author:** ![ady624](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ady624/32/32610_2.png) [@ady624](https://community.smartthings.com/u/ady624)\
**Post date:** [June 28, 2016, 12:41pm UTC](https://community.smartthings.com/t/ecobee3-again/51324/22 "2016-06-28T12:41:25Z")

</div>

Did you copy the raw version? Are there any weird characters at the very top of the file (delete them)?

This error is when you are saving the SmartApp, right? Could be encoding (UTF-8) related. Try and do the copy paste again.

---

<div class="post-metadata">

**Author:** ![nathanendress](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/nathanendress/32/26962_2.png) [@nathanendress](https://community.smartthings.com/u/nathanendress)\
**Post date:** [June 28, 2016, 12:44pm UTC](https://community.smartthings.com/t/ecobee3-again/51324/23 "2016-06-28T12:44:26Z")

</div>

I tried again from the RAW. Here’s the top of the code. Is there something i need to delete?

/\*\*

- Copyright 2015 SmartThings
- 
- Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except
- in compliance with the License. You may obtain a copy of the License at:
- 
- 

```
 http://www.apache.org/licenses/LICENSE-2.0

```

- 
- Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- for the specific language governing permissions and limitations under the License.
- 
- Ecobee Thermostat
- 
- Author: SmartThings
- Date: 2013-06-13  
\*/  
metadata {  
definition (name: “Ecobee Thermostat”, namespace: “smartthings”, author: “SmartThings”) {  
capability “Actuator”

---

<div class="post-metadata">

**Author:** ![ady624](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ady624/32/32610_2.png) [@ady624](https://community.smartthings.com/u/ady624)\
**Post date:** [June 28, 2016, 12:47pm UTC](https://community.smartthings.com/t/ecobee3-again/51324/24 "2016-06-28T12:47:13Z")

</div>

No, not unless there are weird looking characters. Let me get to a conputer and will look at it.

---

<div class="post-metadata">

**Author:** ![ady624](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ady624/32/32610_2.png) [@ady624](https://community.smartthings.com/u/ady624)\
**Post date:** [June 28, 2016, 1:44pm UTC](https://community.smartthings.com/t/ecobee3-again/51324/25 "2016-06-28T13:44:30Z")

</div>

The code you are pasting is not a SmartApp. It’s a Device Type Handler. Go to the My Device Handlers tab and add a new Device Type Handler from code. Not sure if there’s a SmartApp to accompany the DTH, but I assume you can install the standard Ecobee integration from ST and then, once you created the DTHs and published them, go to the Ecobee device in My Devices, edit the ecobee thermostat, and choose the newly imported DTH instead of the standard one. Not sure if this is the way, but it seems the most logical at this point.

---

<div class="post-metadata">

**Author:** ![StrykerSKS](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/strykersks/32/23007_2.png) [@StrykerSKS](https://community.smartthings.com/u/StrykerSKS)\
**Post date:** [June 28, 2016, 6:22pm UTC](https://community.smartthings.com/t/ecobee3-again/51324/26 "2016-06-28T18:22:51Z")

</div>

As ady624 mentions, what you posted was the Device Handler. There is the SmartApps (Connect, Ecobee Routines). And two Device Handlers (Thermostat, Sensor). The instructions guide you through each step, so please follow them line by line.

[Next page](https://community.smartthings.com/t/ecobee3-again/51324.md?page=2)
