# Drive yale Solis01

**URL:** <https://community.smartthings.com/t/drive-yale-solis01/311989>\
**Category:** Deals\
**Created:** [November 6, 2026, 3:20am UTC](https://community.smartthings.com/t/drive-yale-solis01/311989 "2026-11-06T03:20:17Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rodrigo\_Justino](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/rodrigo_justino/32/97594_2.png) [@Rodrigo\_Justino](https://community.smartthings.com/u/Rodrigo_Justino)\
**Post date:** [November 6, 2026, 3:20am UTC](https://community.smartthings.com/t/drive-yale-solis01/311989/1 "2026-11-06T03:20:17Z")

</div>

Hi @Mariano_Colmenarejo,

​Could you please add the fingerprint for my Yale Zigbee lock to your **Zigbee Lock Mc** driver?

- ​ **Manufacturer:** Yale
- ​ **Model:** SOLIS01

​Thank you!

---

<div class="post-metadata">

**Author:** ![h0ckeysk8er](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/h0ckeysk8er/32/195141_2.png) [@h0ckeysk8er](https://community.smartthings.com/u/h0ckeysk8er)\
**Post date:** [November 6, 2026, 3:47am UTC](https://community.smartthings.com/t/drive-yale-solis01/311989/2 "2026-11-06T03:47:21Z")

</div>

> [@Rodrigo\_Justino](#):
>
> Hi @Mariano_Colmenarejo,
> 
> ​Could you please add the fingerprint for my Yale Zigbee lock to your **Zigbee Lock Mc** driver?
> 
> - ​ **Manufacturer:** Yale
> - ​ **Model:** SOLIS01
> 
> ​Thank you!

Mariano is no longer doing any additional development on his drivers.

---

<div class="post-metadata">

**Author:** ![jaidank](https://avatars.discourse-cdn.com/v4/letter/j/9d8465/32.png) [@jaidank](https://community.smartthings.com/u/jaidank)\
**Post date:** [November 6, 2026, 10:28am UTC](https://community.smartthings.com/t/drive-yale-solis01/311989/3 "2026-11-06T10:28:52Z")

</div>

I seem to remember that there is a way to manually force your device to use a driver that is not automatically assigned. I have done this in the past (with a thermostat device) but need to figure out how I did it and update this reply.  
That said, a smart lock is a critical security device and an exact driver would be better/safer.  
I need to find more precise steps, but the proposed solution is to use the [developer.smartthings.com](http://developer.smartthings.com) web page to select a driver that may not have the exact right fingerprint.  
I presume you have paired your lock and it currently uses ‘Zigbee Thing’ driver?

Here is a link to a reply by @Francois_Venter

> [@First Alert New 025 SMCO410 Z-Wave Battery-Powered Smoke Detector & Carbon Monoxide Alarm](https://community.smartthings.com/t/first-alert-new-025-smco410-z-wave-battery-powered-smoke-detector-carbon-monoxide-alarm/300427/69):
>
> @Klober If you are up to it, there is something else to try. This is not a long-term solution. Sign in to the Smartthings developer portal: [Let’s Build a Connected Future - SmartThings Developers](https://developer.smartthings.com/). I can’t remember if you have to register first, but use the same credentials as your Smartthings account. Then select “Tools” from the menu at the top and select “Edge driver builder”. You should now get a display of all your devices. Select the z-wave sensor that was created when you tried to pair the SMCO 410. Once the device is selected, you will see a “Modify Device Configuration” option at the bottom of the page. Then select “Z-Wave Smoke Alarm” and select “Carbon Monoxide Detector” and select “smoke-co-battery” under the profile matches. Now select “Apply changes” and a new driver will…