# Decora Dimmer + Fan Control Switch

**URL:** <https://community.smartthings.com/t/decora-dimmer-fan-control-switch/23355>\
**Category:** Devices & Integrations\
**Created:** [September 21, 2015, 7:17pm UTC](https://community.smartthings.com/t/decora-dimmer-fan-control-switch/23355 "2015-09-21T19:17:15Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![lomax0990](https://avatars.discourse-cdn.com/v4/letter/l/cab0a1/32.png) [@lomax0990](https://community.smartthings.com/u/lomax0990)\
**Post date:** [September 21, 2015, 7:17pm UTC](https://community.smartthings.com/t/decora-dimmer-fan-control-switch/23355/1 "2015-09-21T19:17:15Z")

</div>

Hello,

I’m new to smartthings and just trying to start building out my network.

On the top of my list is replacing a single decora switch that has a built in dimmer and fan control on one switch. Does anyone know if there is a similar product that integrates with smart things? I’ve searchedaround but have yet to find anything.

I’m not concerned with being able to control the fan. I’m really just interested in controlling/dimming the light in this location. But my current setup just has a single gang electrical box with the light/fan control on one switch.

---

<div class="post-metadata">

**Author:** ![mattjfrank](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/mattjfrank/32/100696_2.png) [@mattjfrank](https://community.smartthings.com/u/mattjfrank)\
**Post date:** [September 21, 2015, 7:20pm UTC](https://community.smartthings.com/t/decora-dimmer-fan-control-switch/23355/2 "2015-09-21T19:20:36Z")

</div>

The GE Light Dimmer would accomplish this. You’d need to wire you fan so it’s always hot and then control it via it’s pull chain. You’d be able to control the light via sm or the wall dimmer switch.

---

<div class="post-metadata">

**Author:** ![lomax0990](https://avatars.discourse-cdn.com/v4/letter/l/cab0a1/32.png) [@lomax0990](https://community.smartthings.com/u/lomax0990)\
**Post date:** [September 21, 2015, 8:20pm UTC](https://community.smartthings.com/t/decora-dimmer-fan-control-switch/23355/3 "2015-09-21T20:20:15Z")

</div>

Yeah I guess I forgot that part. Ideally I would still like to control the fan from the switch as well. Since the post I’ve found a few other threads on the topic. Doesn’t seem like any such combo device exists.

---

<div class="post-metadata">

**Author:** ![ero4444](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ero4444/32/131402_2.png) [@ero4444](https://community.smartthings.com/u/ero4444)\
**Post date:** [September 21, 2015, 8:48pm UTC](https://community.smartthings.com/t/decora-dimmer-fan-control-switch/23355/4 "2015-09-21T20:48:31Z")

</div>

My goal was to make sure the fan and light were turned off when we left the house. If that’s all you want AND you have a neutral at the wall switch then Aeon Micro Switch is a good route, if you can squeeze it behind your original switch.

Sorry I see now that you want dimming too. I had to use a separate wireless dimmer module in the fan housing like this one:

> **[Universal Thermostatic Ceiling Fan and Light Remote Control Conversion Kit - Remote Kit For Ceiling Fans - Amazon.com](https://www.amazon.com/Universal-Thermostatic-Ceiling-Control-Conversion/dp/B001RJ8X0M/ref=sr_1_1?ie=UTF8&qid=1442868588&sr=8-1&keywords=ceiling+fan+thermostat)**
>
> The product can be applied to any regular ceiling fan and is easy to install with the enclosed instruction manual following step by step. It is UL licensed and meets all safety requirement. The transm ...

  
Range is kinda terrible but line-of-sight 10-feet works.