# Corded devices to ST (Finland)

**URL:** <https://community.smartthings.com/t/corded-devices-to-st-finland/107408>\
**Category:** Projects & Stories\
**Tags:** hubv2\
**Created:** [November 28, 2017, 6:55am UTC](https://community.smartthings.com/t/corded-devices-to-st-finland/107408 "2017-11-28T06:55:55Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![Teos](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/teos/32/69708_2.png) [@Teos](https://community.smartthings.com/u/Teos)\
**Post date:** [November 28, 2017, 6:55am UTC](https://community.smartthings.com/t/corded-devices-to-st-finland/107408/1 "2017-11-28T06:55:55Z")

</div>

Hi,

I would like to ask if you guys know a solution that could act as a hub for Zigbee/Z-wave devices as well as devices hooked up with a basic low voltage cords? Or possibly a ‘router’ of sorts that can be used to hook light switch cords to, and it would pass the switch/dimmer commands onwards to ST hub.

(By the way, I find it impossible to write a post on an mobile browser because the floating header floats on top of the title field.)

---

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [November 28, 2017, 7:39am UTC](https://community.smartthings.com/t/corded-devices-to-st-finland/107408/2 "2017-11-28T07:39:40Z")

</div>

> [@Teos](#):
>
> Hi,
> 
> I would like to ask if you guys know a solution that could act as a hub for Zigbee/Z-wave devices as well as devices hooked up with a basic low voltage cords? Or possibly a ‘router’ of sorts that can be used to hook light switch cords to, and it would pass the switch/dimmer commands onwards to ST hub.
> 
> (By the way, I find it impossible to write a post on an mobile browser because the floating header floats on top of the title field.)

I’m a little confused by what you’re asking, since I’m not quite sure what you mean by “router” in this context… So I’m just guessing here, and if I’m wrong let me know, but are you asking if there’s a way to control Low-voltage light strips, such as 24 V LED strips, with Z wave or zigbee so that they could be added to a SmartThings system?

If so, then yes, Fibaro makes a zwave controller for 12 to 24 V strips which works well and is quite popular in the community. People also use it with things like sprinkler zone controllers. It is available on both the US and UK zwave frequency.

> **[FIBARO | RGBW Controller • RGBW LED strip management](https://www.fibaro.com/en/products/rgbw-controller/)**
>
> Manage any LED RGB bulb with a simple smart home device installed in a junction box. Smart RGB and RGBW LED strip and bulb controller you'd never seen before.

The other alternative is just to use a transformer in between the strips and a higher power source. That’s a popular method as well.

---

<div class="post-metadata">

**Author:** ![vseven](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/vseven/32/35333_2.png) [@vseven](https://community.smartthings.com/u/vseven)\
**Post date:** [November 28, 2017, 2:06pm UTC](https://community.smartthings.com/t/corded-devices-to-st-finland/107408/3 "2017-11-28T14:06:29Z")

</div>

Are you looking to turn multiple low voltage devices on and off? If so both ST\_Anything and Konnected can do that with the properly rated relays attached. If that’s not what you mean can you describe your use case a little better?

---

<div class="post-metadata">

**Author:** ![Teos](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/teos/32/69708_2.png) [@Teos](https://community.smartthings.com/u/Teos)\
**Post date:** [November 29, 2017, 4:51am UTC](https://community.smartthings.com/t/corded-devices-to-st-finland/107408/4 "2017-11-29T04:51:29Z")

</div>

Thanks everyone for your assistance!

I must admit that my use cases were a bit vague on the first post.

What I’m after is as follows:

1. ST, or a ST and an additional hub which would be operable through SmartThings
2. The system would control groups of dimmable LED downlights separately, the downlights could be straight 230V
3. It would allow me to plug in arbitrary ZigBee devices, like temp sensors, wired switches/dimmers, roller blind motors, and some 10A and 16A power sockets

And to clarify some of these targets:  
2. I think I could wire the downlights as 230V from my utility room with the circuit breaker box, so that there’s a breaker box DIN component such as FNIP-8x10A or a DALI equivalent (?) if those are supported by ST?  
3. I would love to have the Philips Tap switch attached if Green Power is supported by ST?  
3. I would also love to buy sensors from Xiaomi/Aqara as they seem to be at a very competitive price point

The components should to be operable in Finland/EU and shippable here, but wont have to be retailed here. You may disregard this question altogether for it’s a tough one.

---

<div class="post-metadata">

**Author:** ![Teos](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/teos/32/69708_2.png) [@Teos](https://community.smartthings.com/u/Teos)\
**Post date:** [November 29, 2017, 4:57am UTC](https://community.smartthings.com/t/corded-devices-to-st-finland/107408/5 "2017-11-29T04:57:07Z")

</div>

Oh and the low voltage stuff I mentioned. What I mean by that is if I could wire a low voltage cord from the utility room to wall switches, and connect the switches to ST (or some ST sidekick) using the low voltage cable and control the lights with that. This I thought would add reliability and ABB’s free@home and KNX seem to use this kind of wiring for control units if I’m correct.

---

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [November 29, 2017, 8:29am UTC](https://community.smartthings.com/t/corded-devices-to-st-finland/107408/6 "2017-11-29T08:29:05Z")

</div>

I don’t think there is any system which would allow you to plug-in “arbitrary” zigbee devices, because the zigbee standard allows for multiple different “profiles,” and not all profiles are interoperable. In fact some profiles belong to a single manufacturer and are not shared with others.

SmartThings uses the Zigbee Home Automation (ZHA) profile, and can also work with some ZLL profile Devices.

It does not support the Zigbee Green Power profile.

> [@FAQ: Zigbee Application Profiles, or why not all zigbee devices work with SmartThings](https://community.smartthings.com/t/faq-zigbee-application-profiles-or-why-not-all-zigbee-devices-work-with-smartthings/76219):
>
> Zigbee is always zigbee, but the standard allows for different "profiles,"including manufacturer proprietary ones. [image] These are not all able to communicate with each other, they don’t even use the same addressing schemes. SmartThings uses the Zigbee Home Automation profile (ZHA 1.2) and part of the Zigbee 3.0 profile. Devices using other zigbee profiles may be able to join to the network, but their communications may not be understood, or they may frequently drop off because they don’t receive a handshake message they are expecting. There a lot of different ways to explain this, but I think one of the easiest is to think of zigbee as a post office and the different profiles as different languages. The outside envelope for different messages may look similar, have a specific format…

The official SmartThings/Hue integration only works with hue bulbs and light strips attached to a Hue bridge. Not with the tap switch or dimmer switch or motion sensor.

There is one community member who has developed some code to allow other devices which are connected to the hue bridge, specifically including the Phillips Tap, to also be used with SmartThings when they are connected to the hue bridge, but set up is more complicated than with ZHA Devices and it’s still somewhat experimental.

As far as the Xiaomi Devices, they appear to be quite well engineered and are very inexpensive, but they are designed to work with their own Gateway and have not been certified to other zigbee profiles. There are some community members using them with SmartThings, but they can be quite difficult to pair initially and after that there can also be some problems. 😥

In particular, because they are not certified, it has sometimes happened that SmartThings will make a change to the cloud and then the xiaomi devices will all stop working for a while. So if you buy them you run the risk that they might just stop working some day. You can talk to people who are using them with SmartThings in the following thread:

> [@\[OBSOLETE\] Xiaomi Sensors and Button (beta)](https://community.smartthings.com/t/release-xiaomi-sensors-and-button-beta/77576):
>
> Following on from the thread [here](https://community.smartthings.com/t/xiaomi-zigbee-door-window-sensor-motion-sensor-smart-button-device-type-beta/31948) I’ve starting my own thread for my versions of the Xiaomi Motion, Contact and Smart Button device handler. This is so that people are able to find my device handlers easier and concentrate any discussion specific to my version of the handlers rather than previous ones made by others. I’ve kept the status as “beta” as the actual hardware do not claim official HA1.2 compliance and are very tricky to pair initially. However, once they stay successfully paired for a few hours, they have been proven over the last couple of months to be extremely reliable. However, I think it is fair to warn people that this is no guarantee that they will continue to work in the future. More information about pairing in the original thread [here](https://community.smartthings.com/t/xiaomi-zigbee-door-window-sensor-motion-sensor-smart-button-device-type-beta/31948/435) and [here](https://community.smartthings.com/t/xiaomi-zigbee-door-window-sensor-motion-sensor-smart-button-device-type-beta/31948/457). I would suggest pe…

---

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [November 29, 2017, 8:39am UTC](https://community.smartthings.com/t/corded-devices-to-st-finland/107408/7 "2017-11-29T08:39:45Z")

</div>

I’m afraid I am still confused about the wiring questions, and in particular how this would meet safety codes, so I will leave that to other people to discuss.

There are some DIN mountable Lighting Control Devices, particularly some European frequency Z wave ones from Qubino, which are compatible with SmartThings, but again I don’t quite understand The set up you are proposing so I am not sure if they would work for you or not.

For example, if you are using the DIN mountable Device it controls everything on that circuit branch together as one unit, you no longer have individual controls of each lamp, and it sounded like that was one of the things you were trying to accomplish

[http://www.vesternet.com/z-wave-qubino-din-dimmer-gen5](http://www.vesternet.com/z-wave-qubino-din-dimmer-gen5)

Sylvania/Osram makes some individual downlights which work well with SmartThings and allow you to dim either an individual lamp or group them together in any combination that you like, so they are quite popular for large rooms where everything is wired to a single switch but you want to create zone lighting. But these are just regular 230 V downlights, they aren’t part of a low-voltage system. Again, I am not sure if they would meet your needs.

> **[Osram Lightify Down Light Smart Home Connected LED Light/Dimmable/Warm-White to Day Light 2700 K - 6500 K: Amazon.co.uk: Lighting](https://www.amazon.co.uk/Osram-Lightify-Smart-Connected-Light/dp/B00JDJC3N6?th=1)**
>
> Product Description Product benefits controllable via lights switch and smart devices (via Android and iOS) with the advantages of lighting system easy to installed and use contains no mercury areas o ...

---

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [November 29, 2017, 9:06am UTC](https://community.smartthings.com/t/corded-devices-to-st-finland/107408/8 "2017-11-29T09:06:53Z")

</div>

One last thought…

In English, “corded” usually means a wire which is wrapped in insulation and intended to be used from a device to a wall socket, like this:

![IMG_4387](https://global.discourse-cdn.com/smartthings/original/3X/8/2/82868565cdaa1735f32a8a0193984426146cdbf3.JPG)

 ![IMG_4389](https://global.discourse-cdn.com/smartthings/original/3X/3/c/3c4636b5aebd2012bcff05acd6855fb592a6dbb1.JPG)

It does not mean the wires that run inside the wall for mains-powered lighting which is permanently connected to the home’s electrical system.

From your other posts, I have a feeling that you meant “wired” rather than “corded.” But I am still not quite sure.

---

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [November 29, 2017, 4:10pm UTC](https://community.smartthings.com/t/corded-devices-to-st-finland/107408/9 "2017-11-29T16:10:19Z")

</div>

Also, if by chance I have guessed correctly and you meant “wired” rather than “corded,” then re-reading your first post I wonder if you were asking something similar to the following question. I’m feeling quite tired right now and may not be on much for the rest of the day so I’m going to go ahead and answer that. If this is totally off topic to what you were asking, please forgive me.

If you were asking if you need to do special wiring in order to set up a SmartThings system, most people find that they do not.

I think it’s obvious that there will be many battery operated devices that can communicate with a smartthings hub.

In addition, if we look at a typical wired device like a ceiling light with a wall switch there are three separate ways to add devices which can allow that Light to communicate with a smartthings hub.

(by the way, if you ask questions on any other threads in the forum, make sure that you specify that you are in Europe, as the device selection is quite different from the US.)

In all these cases, the device will communicate with the SmartThings hub and the SmartThings hub will communicate with any other devices that it controls, so unlike some other systems you can mix-and-match devices from any protocol that smartthings supports.

That is, every wall switch that works with SmartThings can be used to control every light bulb that works with SmartThings. And every sensor that works with SmartThings can be used to trigger every wall switch or sensor that works with SmartThings. 🕶

This is one of the best features of the SmartThings platform. As long as an individual device will work with SmartThings, you can then set it up with rules to interact with any of the other devices on your SmartThings account.

Now back to the three ways in which we might set up SmartThings to control a light on the ceiling.

1. First, you can simply use a smartbulb. These come in many different formats these days, including the downlights that I linked to in a previous post.

Anything which connects to a Philips hue bridge, including some of the IKEA lightbulbs, can then be used with SmartThings. There are a number of different brands that can work in this way.

In addition, some bulbs can talk to SmartThings without needing an additional bridge device. This would include LIFX and Sengled, among others available in the UK.

When you use a smartbulb, you just replace the old bulb with the new, so this is the simplest option.

By the way, if you want a battery operated wall switch, something similar to the hue tap, to work with your smartbulbs, there are several choices in Europe that will work with SmartThings. See the following thread (this is a clickable link)

> [@FAQ: Full list of buttons and remotes confirmed to work with SmartThings \[Not all devices listed work with the 2020 Platform\]](https://community.smartthings.com/t/faq-full-list-of-buttons-and-remotes-confirmed-to-work-with-smartthings/9729/):
>
> I’d like to know which buttons and remotes are currently supported or might be supported in the future. Ideally, I’d like to find something similar to the following: [http://www.evolvecontrols.com/devices/control-devices/glass-series](http://www.evolvecontrols.com/devices/control-devices/glass-series) Though alternatively just a simple nice-looking button which actually works unlike this Aeon according to Amazon reviews: [http://www.amazon.com/Touch-Panel-Button-Switch-AL-001/dp/B00GL6B4GG/ref=sr\_1\_3?s=hi&ie=UTF8&qid=1421468320&sr=1-3&keywords=aeon+button](http://www.amazon.com/Touch-Panel-Button-Switch-AL-001/dp/B00GL6B4GG/ref=sr_1_3?s=hi&ie=UTF8&qid=1421468320&sr=1-3&keywords=aeon+button) There is an Aeon Key Fob as well, but it doesn’t seem to be very durable or stylish: What else is available?

1. Second, you may be able to replace the wall switch with a wall switch that can communicate with SmartThings. This is often more challenging in Europe than in the US because almost all mains-powered wall switches that work with SmartThings will require that there be a neutral wire at the switchbox, and many homes in Europe do not have this.

But if your home does have neutral wires at the switch boxes, there are some choices that work with 230 V current. You won’t have to replace all the wires in between the switch and the ceiling fitting. You just have to replace the switch itself.

Vesternet has a good selection of smart switches, but only the ones which use zwave or zwave plus Will work directly with SmartThings.

> **[Z-Wave - Wall Plugs & Sockets](https://www.vesternet.com/collections/z-wave-plugs-sockets?tech=832%2C833)**
>
> Plug your lighting into Z-Wave socket switches, plugs & dimmers. Wirelessly control lights & remotely track power consumption through a home automation system. Plug in a Z-Wave Socket and you instantly have complete wireless control over...

They also have a very good article describing typical UK wiring that might make this clearer.

> **[APNT-23 - Understanding 2-wire and 3-wire Lighting Systems](https://www.vesternet.com/pages/apnt-23-understanding-2-wire-and-3-wire-lighting-systems)**
>
> This application note explains the difference between 2-wire and 3-wire lighting systems and helps you understand which version you have in your installation.

![IMG_4394](https://global.discourse-cdn.com/smartthings/original/3X/6/2/62b8ef122c179e6086e959a898dc4fc1b199e250.PNG)

1. if you don’t want to use smartbulbs and you don’t have neutral wires at your light switch boxes, you can still add smartthings control of a ceiling light without having to rewire everything. You do this by using an in wall micro, typically installed in the Ceiling rose.

These are quite small, typically about a centimeter square, and are spliced into the wiring. There are several brands available in Europe. I think the most popular in the community is probably Fibaro, but Aeotec, Qubino, and a couple of other brands are also used by many community members.

> **[Z-Wave - Light and Lamp Modules](https://www.vesternet.com/collections/z-wave-modules?tech=832%2C833)**
>
> Z-Wave Modules are probably the most flexible devices available to smart home enthusiasts. Modules can be used to control pretty much anything you can think of - lights, power, pumps, blinds, awnings, heating, cooling, gates... the list is endless.

there are several different types of days. Some are dimmers. Some can be installed on DIN rails. Some can handle two branches of the wiring.

![IMG_4392](https://global.discourse-cdn.com/smartthings/original/3X/5/a/5af918645ab754a5fca6614d9772d3a961582d39.JPG)

 ![IMG_4390](https://global.discourse-cdn.com/smartthings/original/3X/7/3/73c7c9bb1171ca60a05afc518398735f8e45baad.JPG) ![IMG_4391](https://global.discourse-cdn.com/smartthings/original/3X/3/6/3663a9ca2f42ea12c7c329b8d6066b6b29567ab3.JPG)

Some of the micros, specifically the Fibaro, can even be used without a neutral wire in some circumstances, so you may be able to put them behind the light switch rather than at the ceiling rose. 🕶🎚💡

If you have any questions about any specific micros there are a number of European community members who have a lot of experience with them. @anon36505037 , for example, has done his whole house with Fibaro modules.

So those are three different ways that you can add smartthings control to a ceiling light without having to add new wires. Again, I’m just guessing that that might be relevant to your first post, if it’s not, my apologies for going off on such a long tangent.

---

<div class="post-metadata">

**Author:** ![Teos](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/teos/32/69708_2.png) [@Teos](https://community.smartthings.com/u/Teos)\
**Post date:** [December 5, 2017, 11:49am UTC](https://community.smartthings.com/t/corded-devices-to-st-finland/107408/10 "2017-12-05T11:49:08Z")

</div>

Wow, that was extensive! Sorry for talking about _corded_, when what I meant was _wired_.

Those three ways of getting connected is very useful to know, thanks!
