# Can't see the "Create new Device Handler" link on the "My Device Handlers" page

**URL:** <https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565>\
**Category:** General Discussion\
**Tags:** github\
**Created:** [October 25, 2022, 4:54pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565 "2022-10-25T16:54:28Z")\
**Posts on this page:** 19\
**Page:** 1

<div class="post-metadata">

**Author:** ![Richard\_von\_Brecht](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/richard_von_brecht/32/96383_2.png) [@Richard\_von\_Brecht](https://community.smartthings.com/u/Richard_von_Brecht)\
**Post date:** [October 25, 2022, 4:54pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/1 "2022-10-25T16:54:28Z")

</div>

I would like to add a new device handler to my hub. I have done this previously by copying and pasting a copy of the code using the “My Device Handlers” page using the “Create new device handler” option. That doesn’t appear on that page. Instead, I get the below on my display. Am I stuck somewhere on a page tree?  
 ![image](https://global.discourse-cdn.com/smartthings/original/3X/c/b/cb4e2da6b1162ac784ede8243ea6317e12e3ff5e.png)

---

<div class="post-metadata">

**Author:** ![johnconstantelo](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/johnconstantelo/32/111869_2.png) [@johnconstantelo](https://community.smartthings.com/u/johnconstantelo)\
**Post date:** [October 25, 2022, 4:57pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/2 "2022-10-25T16:57:20Z")

</div>

That’s because ST has moved over to using Edge drivers and DTH’s are about to go away with the deprecation of Groovy and the migration. You also can’t add any SmartApps now either.

> [@The End of Groovy Has Arrived](https://community.smartthings.com/t/the-end-of-groovy-has-arrived/246280):
>
> Beginning September 30, 2022, at 00:00 (PST) we will start migrations of Groovy device DTHs as well as SmartLighting and SevereWeather SmartApps, two of our most popular Smartapps built on Groovy. On October 15th 2022 certain functions of the legacy developer IDE, such as the creation of new DTH’s, Smartapps, and debugging tools will be removed from the SmartThings platform and will no longer be supported. After migrations are complete, this means that devices and automations previously using Groovy will now exclusively operate with our latest hub and cloud technology. Recognizing trends within the smart home industry, SmartThings has been working diligently to evolve our platform into a modern REST API framework. Lua-based Edge drivers are a major step, which is being followed quickly w…

> [@FAQ: I have no idea what Edge is. Is that a new developer tool? (2022)](https://community.smartthings.com/t/faq-i-have-no-idea-what-edge-is-is-that-a-new-developer-tool-2022/237775):
>
> As of September 2023, SmartThings has now almost completed transition to a new architecture, part of which is called Edge. The Samsung-hosted free groovy cloud gradually went away beginning on September 30, 2022. For hub-connected devices, including Zwave and Zigbee, the DTH replacement will be Edge Drivers, which are written in the Lua programming language and will run locally on your own hub. IF YOU ARE NEW TO SMARTTHINGS If you are new to SmartThings, the basics of the SmartThings architecture are pretty simple: A) An “Edge Driver” is code that runs on your SmartThings/Aeotec hub so the hub can talk directly to an individual device. If you don’t have a hub, you can skip all the rest of this thread: it won’t apply to your setup. sun_with_face B) If your device uses a “cloud to clo…

---

<div class="post-metadata">

**Author:** ![Richard\_von\_Brecht](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/richard_von_brecht/32/96383_2.png) [@Richard\_von\_Brecht](https://community.smartthings.com/u/Richard_von_Brecht)\
**Post date:** [October 25, 2022, 10:01pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/3 "2022-10-25T22:01:57Z")

</div>

I was afraid you’d say that. I saw the notices about SmartThings being migrated to an open architecture. So there’s no work around, right now? Would this impact my existing device handlers? One of my smart switches died the other day. Nevertheless, I doubt this is the cause. It’s sister is still running. 🤞

I’m not a coder and not much of ST power user either. I’m not looking forward to climbing that frustrating experience mountain again. When and where will we be able to able load code copied from Github again? (I assume that stuff will have to be migrated too.)

---

<div class="post-metadata">

**Author:** ![TN\_Oldman](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/tn_oldman/32/31062_2.png) [@TN\_Oldman](https://community.smartthings.com/u/TN_Oldman)\
**Post date:** [October 25, 2022, 10:10pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/4 "2022-10-25T22:10:31Z")

</div>

You didn’t quite understand his answer. That method is no longer available.

You have to use edge drivers now. If you added a new switch and it was recognized by Smartthings for having a compatible edge driver. Then that’s what the hub used. Unless you already had a working DTH installed. Then it should have used that.

You can’t add things like you used to anymore.

The times they are a changing!

---

<div class="post-metadata">

**Author:** ![Richard\_von\_Brecht](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/richard_von_brecht/32/96383_2.png) [@Richard\_von\_Brecht](https://community.smartthings.com/u/Richard_von_Brecht)\
**Post date:** [October 25, 2022, 11:08pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/5 "2022-10-25T23:08:43Z")

</div>

Yeah, “So there’s no work around, right now?” That statement reluctantly acknowledges that. Looking at the link it’ll be no sooner than past the first of the year when Samsung finishes the transition that is if they stay on schedule. IDE is going away taking the few device handlers that I acquired with it.

Like I said for the occasional user like myself this is going to be painful. I’m not sure that making that investment again is worth it. I might just have to scale back my system.

---

<div class="post-metadata">

**Author:** ![jkp](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jkp/32/117130_2.png) [@jkp](https://community.smartthings.com/u/jkp)\
**Post date:** [October 25, 2022, 11:15pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/6 "2022-10-25T23:15:39Z")

</div>

If you provide more details as to the devices (brand/model) and the custom Device Handlers you were using - perhaps someone can offer you more assistance with the transition to Edge for them 🙂

It could be a very simple switch - always possible

---

<div class="post-metadata">

**Author:** ![Richard\_von\_Brecht](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/richard_von_brecht/32/96383_2.png) [@Richard\_von\_Brecht](https://community.smartthings.com/u/Richard_von_Brecht)\
**Post date:** [October 25, 2022, 11:23pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/7 "2022-10-25T23:23:53Z")

</div>

I have a switch that I need to replace now. Based on what I just read I can’t install a driver to allow its use in the advance mode until the new Edge system is commissioned.

---

<div class="post-metadata">

**Author:** ![jkp](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jkp/32/117130_2.png) [@jkp](https://community.smartthings.com/u/jkp)\
**Post date:** [October 25, 2022, 11:26pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/8 "2022-10-25T23:26:52Z")

</div>

again, if you want to provide the brand/model. someone may be able to assist or you can post in the request custom edge drivers thread…

---

<div class="post-metadata">

**Author:** ![Richard\_von\_Brecht](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/richard_von_brecht/32/96383_2.png) [@Richard\_von\_Brecht](https://community.smartthings.com/u/Richard_von_Brecht)\
**Post date:** [October 26, 2022, 12:19am UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/9 "2022-10-26T00:19:45Z")

</div>

I’ll look into to that discussion. Thanks

---

<div class="post-metadata">

**Author:** ![Terri\_Baker](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/terri_baker/32/95826_2.png) [@Terri\_Baker](https://community.smartthings.com/u/Terri_Baker)\
**Post date:** [October 26, 2022, 5:38am UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/10 "2022-10-26T05:38:55Z")

</div>

> [@Richard\_von\_Brecht](#):
>
> Based on what I just read I can’t install a driver to allow its use in the advance mode until the new Edge system is commissioned

You _can_ install device handlers _now_. You do not use the IDE for anything anymore. It is all done through the app. No copy and pasting code, just find the appropriate driver and 3 clicks has it loaded to your hub.  
They asked for the device name model and manufacturer to help guide you to the correct edge driver.

---

<div class="post-metadata">

**Author:** ![Richard\_von\_Brecht](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/richard_von_brecht/32/96383_2.png) [@Richard\_von\_Brecht](https://community.smartthings.com/u/Richard_von_Brecht)\
**Post date:** [October 26, 2022, 2:20pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/11 "2022-10-26T14:20:32Z")

</div>

There’s a generic do-nothing driver. I was hoping to install the more advanced ST unapproved driver that manufacturer had developed that’s on their website.

But thanks for your assistance

---

<div class="post-metadata">

**Author:** ![MarkTr](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/marktr/32/76583_2.png) [@MarkTr](https://community.smartthings.com/u/MarkTr)\
**Post date:** [October 26, 2022, 3:01pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/12 "2022-10-26T15:01:40Z")

</div>

> [@Richard\_von\_Brecht](#):
>
> I was hoping to install the more advanced ST unapproved driver that manufacturer had developed that’s on their website.

What device are you trying to install? If the manufacturer has additional features that were previously available via a custom DTH, it’s on them to supply an Edge driver for ST compatibility. That may already have happened (but then they should have made that available on their web page).

Since you mention switches, I wonder if you’re using Zooz devices; the sales page suggests they want you to register products to access their Edge driver channel (just did mine), but their helpdesk site still gives instructions for installing a DTH. The Edge channel is already up and running and can be accessed via this forum.

Again, if you tell us what the device is, we’ll be able to offer a lot more input on getting full function, whether it’s pointing you to the manufacturer’s driver or a community driver, or telling you to start hassling the manufacturer until they get caught up.

---

<div class="post-metadata">

**Author:** ![Richard\_von\_Brecht](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/richard_von_brecht/32/96383_2.png) [@Richard\_von\_Brecht](https://community.smartthings.com/u/Richard_von_Brecht)\
**Post date:** [October 26, 2022, 3:43pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/13 "2022-10-26T15:43:02Z")

</div>

You hit the nail on the head exactly and I just sent ZOOZ a message asking that exact question. Base on your reply and others Edge drivers are available.

We’ll see if they have one for the ZEN76 switch. I have about four of them. I’m using the generic driver right now.

Some of my other switches are beginning to fail so I’ve decided to standardizing on the ZOOZ switches.

---

<div class="post-metadata">

**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\
**Post date:** [October 26, 2022, 4:12pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/14 "2022-10-26T16:12:16Z")

</div>

Zooz had a Edge driver for the Zen 76.

> [@\[ST EDGE\] Zooz Edge Driver Channel](https://community.smartthings.com/t/st-edge-zooz-edge-driver-channel/246497):
>
> This is the [Official Edge Driver Channel](https://bestow-regional.api.smartthings.com/invite/Y723nw3pqxMr) for Zooz Products. Supported Devices: Zooz ZAC36 Valve Actuator Zooz ZAC38 Range Extender &nbsp; (Zooz Range Extender) Zooz ZEN04 Smart Plug &nbsp; (Zooz Switch) Zooz ZEN05 Outdoor Plug &nbsp; (Zooz Switch) Zooz ZEN06 Smart Plug &nbsp; (Zooz Switch) Zooz ZEN14 Outdoor Double Plug &nbsp; (Zooz Multichannel Switch) Zooz ZEN15 Power Switch &nbsp; (Zooz Switch) Zooz ZEN16 MultiRelay &nbsp; (Zooz Multichannel Switch) Zooz ZEN17 Universal Relay &nbsp; (Zooz Multichannel Switch) Zooz ZEN20 Power Strip &nbsp; (Zooz Multichannel Switch) Zooz ZEN21 On/Off Switch &nbsp; (Zooz Switch) Zooz ZEN22 Dimmer &nbsp; (Zooz Switch) Zooz ZEN23 Toggle Switch &nbsp; (Zooz Switch) Zooz ZEN24 Toggle Dimmer &nbsp; (Zooz Switch) Zooz ZEN25 Double Plug &nbsp; (Zooz Multichannel Switch) Zooz ZEN26 S2 On/Off Switch &nbsp; (Zooz Switch) Zooz ZEN27 S2 …

---

<div class="post-metadata">

**Author:** ![Richard\_von\_Brecht](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/richard_von_brecht/32/96383_2.png) [@Richard\_von\_Brecht](https://community.smartthings.com/u/Richard_von_Brecht)\
**Post date:** [October 26, 2022, 10:02pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/15 "2022-10-26T22:02:03Z")

</div>

Well I’ve begun the journey and climbed my first foot hill on the road to knowledge and experience. I’ve added the new Edge Drivers to my humble Home hub.

My new switch is loaded and working. Thanks to everyone in the community that helped. Also thanks to some YouTube videos and Google

[![](https://global.discourse-cdn.com/smartthings/original/3X/e/a/ea8125abd50ded27ae5d610b9279f4fdd2b2239a.jpeg "How to Install an Edge Driver on your SmartThings Hub PLUS Dome Edge Driver Information") ](https://www.youtube.com/watch?v=X81EsMUW8HI)

---

<div class="post-metadata">

**Author:** ![guzzuk](https://avatars.discourse-cdn.com/v4/letter/g/e56c9b/32.png) [@guzzuk](https://community.smartthings.com/u/guzzuk)\
**Post date:** [December 13, 2022, 11:36am UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/16 "2022-12-13T11:36:07Z")

</div>

Having the same issue - I had a virtual thermostat device creator to create a closed loop heater control (smart plug and thermometer) thou this has stopped working. Is there a replacement for this within Edge?

---

<div class="post-metadata">

**Author:** ![MarkTr](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/marktr/32/76583_2.png) [@MarkTr](https://community.smartthings.com/u/MarkTr)\
**Post date:** [December 13, 2022, 2:26pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/17 "2022-12-13T14:26:28Z")

</div>

> [@guzzuk](#):
>
> I had a virtual thermostat device creator to create a closed loop heater control (smart plug and thermometer)

This one might work for you.

> [@(EDGE Driver-Mc): Z-Wave Sensor and Child Thermostat Mc](https://community.smartthings.com/t/new-release-edge-driver-z-wave-sensor-and-child-thermostat-mc-beta/251680/):
>
> (New Release) Edge Driver Z-Wave Sensor Mc change to Z-Wave Sensor and Child Thermostat Mc The driver is now called Z-Wave Sensor and Child Thermostat Mc and will be in testing time, since I have only been able to test with one Aeotec 6 Sensor device. In the meantime I will keep both drivers updated. I have modified the driver to be able to create a Child Virtual Thermostat in the installed devices with Temperature Measurement Capability as a option when user need it. Thanks to @nayelyz to help me to get the correct temperature scale emitted by parent device. The virtual thermostat is created by selecting the preference in device settings. The device that is created has the name of Thermostat + the name of the parent device It will show the temperatur…

---

<div class="post-metadata">

**Author:** ![guzzuk](https://avatars.discourse-cdn.com/v4/letter/g/e56c9b/32.png) [@guzzuk](https://community.smartthings.com/u/guzzuk)\
**Post date:** [December 13, 2022, 4:21pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/18 "2022-12-13T16:21:19Z")

</div>

Hi, I’ve installed that thou couldn’t work out how to associate it with the temperature device (using Aqara Temperature Sensor currently thou could try with Samsung multi sensor?)

thanks  
Andy

---

<div class="post-metadata">

**Author:** ![MarkTr](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/marktr/32/76583_2.png) [@MarkTr](https://community.smartthings.com/u/MarkTr)\
**Post date:** [December 13, 2022, 4:23pm UTC](https://community.smartthings.com/t/cant-see-the-create-new-device-handler-link-on-the-my-device-handlers-page/250565/19 "2022-12-13T16:23:29Z")

</div>

I think you need to change your temp sensor’s driver to the thermostat device; if the fingerprint isn’t included, you might have to request it to be added. You’d likely have better luck on that with the multi sensor. If you ask on the linked thread Mariano should be able to help you figure it out.
