# Calling on OnHub users to share their experience! **URL:** \ **Category:** Connected Things\ **Created:** [September 14, 2016, 7:59pm UTC](https://community.smartthings.com/t/calling-on-onhub-users-to-share-their-experience/57489 "2016-09-14T19:59:17Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![SBDOBRESCU](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/sbdobrescu/32/30067_2.png) [@SBDOBRESCU](https://community.smartthings.com/u/SBDOBRESCU)\ **Post date:** [September 14, 2016, 8:55pm UTC](https://community.smartthings.com/t/calling-on-onhub-users-to-share-their-experience/57489/3 "2016-09-14T20:55:00Z")
> [@JH1](#): > > What are the extenders you have now and the ‘network complexity’ you deal with? Well long story long 🙂 , I started looking at streamlining my SmartThings set up and the most complex rules I have, are around identifying who is home. You know, not everyone in the household wants to wear an arrival sensor around their necks, so I had to come up with some crazy ways of determining presence (yes, I tried the [asuswrt](https://community.smartthings.com/t/release-asuswrt-wifi-presence/37802) way and some other community based solutions, but none really worked for me) ☹ In my quest to find a more straight forward way to use wifi as presence, I came across OnHub, which does it rather seamlessly. And that made me (re)evaluate my existing network set up. And here it is. I run 5 wi-fi networks. My HA hubs and devices are on a FIOS Quantum router set for specific channels, my other devices are on a Asus AC1900 bridged router (set on different channels to avoid interference) and my son’s room is on a AC1200 extender with only the the 5 GHz band enabled. It seems to me that I could have the wifi presence I need and only one wi-fi network, if I go with OnHub. But then I wonder why break it, if it’s been working well for a year… --- _[View the full topic](https://community.smartthings.com/t/calling-on-onhub-users-to-share-their-experience/57489)._