# Bond - Smartthings integration **URL:** \ **Category:** Connected Things\ **Created:** [July 19, 2026, 5:54pm UTC](https://community.smartthings.com/t/bond-smartthings-integration/310274 "2026-07-19T17:54:59Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![jkp](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jkp/32/117130_2.png) [@jkp](https://community.smartthings.com/u/jkp)\ **Post date:** [July 19, 2026, 6:15pm UTC](https://community.smartthings.com/t/bond-smartthings-integration/310274/2 "2026-07-19T18:15:12Z")
There is a custom Edge driver available if you want to remove the linked service and add the Bond hub through a direct LAN connection. > [@\[ST Edge\] Bond Bridge LAN \[BETA\]](https://community.smartthings.com/t/st-edge-bond-bridge-lan-beta/241101): > > Thank you to the team that participated in Alpha testing while the driver was being developed. After a few weeks of stable use, the driver is now rolling to beta with the following feature set: Bond Bridge, Bond Bridge Pro, and Smart By Bond (SBB) Devices Ceiling fans including multiple speeds, lights, dual lights, dimmable lights Fireplaces with flame level control, integrated fan and lights Shades and awnings with position control Lights with both switched and brightness controls Bidets Generic IR and RF remotes compatible with Bond Configurable dashboard layout for devices with multiple components (e.g. Fan/Light Combos) Control of the ring brightness of the bridge itself for use in scenes This will be an open beta, as the driver is not expected to need many updates. Any updates will… If you wish to continue using the linked service… provide more details such as type of devices (brand/model) you are having an issue with? is the firmware of the bond bridge up-to-date? --- _[View the full topic](https://community.smartthings.com/t/bond-smartthings-integration/310274)._