# Better Dimmable Wired Switch for Use with Hue?

**URL:** <https://community.smartthings.com/t/better-dimmable-wired-switch-for-use-with-hue/43190>\
**Category:** Device Ideas\
**Tags:** lighting, hue, smartlighting, wallswitch, switch\
**Created:** [March 24, 2016, 7:04pm UTC](https://community.smartthings.com/t/better-dimmable-wired-switch-for-use-with-hue/43190 "2016-03-24T19:04:28Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [March 24, 2016, 7:40pm UTC](https://community.smartthings.com/t/better-dimmable-wired-switch-for-use-with-hue/43190/2 "2016-03-24T19:40:50Z")

</div>

A dimmer switch, smart or dumb, should never control the current to a smart bulb. The two devices will confuse each other, and it is likely that you will eventually burn out either the switch or the bulb.

You can use a smart dimmer switch with dumb dimmable bulbs, no problem.

Or you can use A smart dimmer switch that works by sending instructions to the hub which then sends instructions to the bulb. That smart switch can either be battery-operated, or just on a different circuit.

Some people do hotwire the connection to the smart bulbs so that the circuit is no longer controlled by the switch, which is another option, although then you will not be able to turn the bulbs off if the home automation system is not working.

**Toggle switches and Smart Bulbs**

You could also use a smart switch which just toggles, doesn’t dim, to control the current to smart bulbs, but the bulb manufacturers generally do not recommend that… They expect the bulbs to be always powered on.

There are two reasons for that. First, bulb life will actually be better if the current is not been cut on and off. Second, these bulbs act as repeaters for each other, so if you are cutting current around the house you may suddenly find that the bulbs which are farthest from the bridge no longer work. Or just some random group of bulbs stops working because someone turned off the wall switch in another room for a bulb that was being used as a repeater for them. The bulb network will work the best with all the bulbs remaining on, because it gives the most options for repeating messages.

**Smart switch covers**

one of the newest device types is a smart switch cover which leaves the original switch in place powered on (no wiring changes, and available if the home automation system fails) and places a battery operated switch over the top of it for intuitive control of any device Controlled by the network, including smart bulbs.

**Detailed discussion**

The following thread has a detailed discussion of various switch options for use with smart bulbs. Different ones will work for different people. 🕶

> [@FAQ: Philips Hue and Other Smart Bulbs - What sort of light switches to use with them? (Long FAQ)](https://community.smartthings.com/t/faq-philips-hue-and-other-smart-bulbs-what-sort-of-light-switches-to-use-with-them/28984/):
>
> Thinking on a big move to Hue lights, the real question is - what switches to use with them? If they’re all automatable via ST and other devices, do I really want to put them all on controllable switches too? There’s the advantage that I can arrange to ensure those switches are on so that the the Hue bulbs would be too…but it also leaves open the ability for folks to just turn them off and leave them off. Hmm. Thoughts?

---

_[View the full topic](https://community.smartthings.com/t/better-dimmable-wired-switch-for-use-with-hue/43190)._
