(EDGE Driver-Mc): Zigbee Drivers for Motion, Open/Close, Moisture, Smoke-Co Sensors and others Devices

@Mariano_Colmenarejo

I have another 2-channel zemismart switch. This model is older than the others I sent before

  • application: 01
  • endpointId: 11
  • manufacturer: Feibit Inc co.
  • model: FB56+ZSW1HKJ2.7
  • onOff: catchall
  • zigbeeNodeType: ROUTER

11 0104 0002 00 05 0000 0003 0004 0005 0006 00

Sorry, I have not zwave edge drivers

This device is in the stock smartthing Edge driver Beta Channel: zigbee motion sensor driver
or in my channel with name Zigbee Motion Sensor Mc

  - id: "ikea/motion"
    deviceLabel: IKEA motion Sensor
    manufacturer: IKEA of Sweden
    model: TRADFRI motion sensor
    deviceProfileName: motion-battery

Added to this version of Zigbee Temp Humidity Sensor Mc

β”Œβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”
β”‚ Name        β”‚ Zigbee Temp Humidity Sensor Mc       β”‚
β”‚ Version     β”‚ 2021-12-21T18:14:37.316796           β”‚
β””β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”˜
  - id: "Tuya/TS0201"
    deviceLabel: Tuya TS0201
    manufacturer: _TZ2000_a476raq2
    model: TS0201
    deviceProfileName: temp-humid-battery

Added to Thermostat driver in case you use as Thermostat device

β”Œβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”
β”‚ Name        β”‚ Zigbee Temp Sensor with Thermostat Mc β”‚
β”‚ Version     β”‚ 2021-12-21T18:14:28.192244            β”‚
β””β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”˜
  - id: "Tuya/TS0201"
    deviceLabel: Tuya TS0201
    manufacturer: _TZ2000_a476raq2
    model: TS0201
    deviceProfileName: temp-humid-therm-battery
1 Like

Added to this version

β”Œβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”
β”‚ Name        β”‚ Zigbee Multi Switch Zemismart Mc     β”‚
β”‚ Version     β”‚ 2021-12-21T18:27:13.836775           β”‚
β””β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”˜
  - id: "FeiBit/ZSW1HKJ2.7"
    deviceLabel: FeiBit 2 Switch
    manufacturer: Feibit Inc co.
    model: FB56+ZSW1HKJ2.7
    deviceProfileName: two-switch

@Araken1,

I was referring to a photo of the siren, to see what it is like

Thanks

Thanks!!!

@Mariano_Colmenarejo this came to publish? I got lost in the posts

I do not understand

@Mariano_Colmenarejo

the one I sent yesterday I don’t think it published

Smart Plug (has energy monitoring)

  • application: 43
  • endpointId: 01
  • manufacturer: _TYZB01_b1ngbmlm
  • model: TS0112
  • zigbeeNodeType: ROUTER

01 0104 0051 00 07 0000 0003 0004 0005 0006 0702 0B04 01 0019

Added to this version

β”Œβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”
β”‚ Name        β”‚ Zigbee Switch Power Mc               β”‚
β”‚ Version     β”‚ 2021-12-21T20:25:22.961528           β”‚
β””β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”˜
  - id: "TYZB01_b1ngbmlm/Plug"
    deviceLabel: TYZB01 Plug
    manufacturer: _TYZB01_b1ngbmlm
    model: TS0112
    deviceProfileName: switch-power-energy-plug

@Mariano_Colmenarejo
Will the following Zigbee β€œIris Outlet” with power monitoring work with your driver?

For the clusters that should work, tomorrow I add it

Thanks, no rush.

I have the Pc on!

Added to this date version of driver

β”Œβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”¬β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”
β”‚ Name        β”‚ Zigbee Switch Power Mc               β”‚
β”‚ Version     β”‚ 2021-12-21T21:24:11.245084           β”‚
β””β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”΄β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”˜
  - id: "CentraLite/3210-L"
    deviceLabel: CentraLite Plug
    manufacturer: CentraLite
    model: 3210-L
    deviceProfileName: switch-power-energy-plug


Understend now

1 Like

Works good.
I have an 11 watt led bulb connected to it and the power meter reads 11.0 watts. You can’t get any closer.
Thanks again for your help.

1 Like

Light switch zemismart touch no neutral

Data * application: 43

  • endpointId: 01
  • manufacturer: _TYZB01_Lrjzz1UV
  • model: TS0013
  • onOff: catchall
  • zigbeeNodeType: SLEEPY_END_DEVICE
    Raw Description 01 0104 0100 00 03 0000 0003 0006 01 0019

Hello, would you like to make a drive? I have several of these. Sorry for bothering.

Offline.

Ok, thanks. I searched for it on the top of the page and it wasn’t there.