[Beta] Zigbee Edge Driver compatible with Lidl, Ecosmart, Osram, SmartThings & Others

Thanks Mariano
Your driver for the light bulb is awesome .Both the ikea light bulb and third reality motion sensor are working great.

I Have 5 sonoff motion sensor 3 pair with your driver , 2 of them wont pair show up as a thing . The only difference in the ide is the model , those 2 that they are not working is listed a model : 66666 the other 3 working one is model : MS01 .

Can you add model 66666 to the fingerprint ?

Also have the Sonoff SNZB-04 pair but after one day they show up as offline if the sensor as not been trigger . When the sensor is offline , i just have to open closed the door and the sensor show up online .

Any plan ta integrated the aqara motion and door sensor too ?
Thanks Sylvain


They didn’t pair previously but if you just added them I will try this evening

Thank you for your comments.
Added to zigbee motion sensor Mc

  - id: "eWeLink/Motion 66666"
    deviceLabel: eWeLink Motion Sensor
    manufacturer: eWeLink
    model: 66666
    deviceProfileName: motion-battery

The zigbee motion sensor and zigbee contact drivers are the beta stock to which I am adding fingersprint to the corresponding profiles.

The only modification that the zigbee motion sensor has, is to adjust the temperature reports on the sensors that have temperature.

If you want I add those fingerprints to the drivers and try?

Thank you Mariano
The fix for sonoff motion sensor work .
There the aqara sensor.

I will let you know if they work good .
Thank you
Sylvain

What capabilities does each have?
The contact: Contact and battery?
The one of movement: Motion, illuminance and battery?
The profile with illuminance is not in the defaut driver, I’ll create it but I don’t know if it will work

I’ll let you know when they are added

1 Like

(NEW RELEASE) Version 2.0 of the Edge Driver Zigbee Light Multifunction Mc

Improvements and bug fixes:

  • At the request of @milandjurovic71, preferences have been added for Minimum and Maximum Level settings of the Circadian Lighting function. In this way they are independent of the Llevel settings for progressive ON

  • The code has been corrected to prevent the “ Active " selections of the Progressive ON-OFF and Circadian Lighting functions from being reset to " Inactive " when a Reboot Hub or Driver update happens.

To facilitate the update, I am going to change version 1.0 to the name Zigbee Light Multifunction Mc- (OLD).

I will publish the new version 2.0 with the original name Zigbee Light Multifunction Mc

In this way, your driver installed will have the name with (OLD), indicating that there is a new version available and you can install the new version with a driver change whenever you want.

1 Like

Yes you are correct.
I will test it and let you know.

Thanks

@Sylvain,

Contact added to zigbee Contact Mc

  - id: "LUMI Open/Close Sensor"
    deviceLabel: LUMI Open/Close Sensor
    manufacturer: LUMI
    model: lumi.sensor_magnet.aq2
    deviceProfileName: contact-battery-profile

@Sylvain,

Added to zigbee motion sensor Mc

  - id: "LUMI/ Motion Sensor"
    deviceLabel: LUMI Motion Sensor
    manufacturer: LUMI
    model: lumi.sensor_motion.aq2
    deviceProfileName: motion-illuminance-battery

@Sylvain,

Remember that you have to wait several hours until your hub is updated with the new versions of the drivers.

As a reference, you can look at the version of the drivers that you see when accessing the driver in the Hub, menu driver.

The version of the contact sensor must be this or newer:

Zigbee Contact Mc: 2021-11-09T20:04:22.270475

The version of the motion driver must be this or more recent:

Zigbee Motion Sensor Mc: 2021-11-09T20:15:20.647504

1 Like

Hi @Mariano_Colmenarejo , @Paul_Oliver. I’m wondering if this zigbee-multi-switch-Zemismart edge driver may work with the Zemismart No Neutral Wall Switch shown below. I’m really looking forward for local control and like the design of those switches :stuck_out_tongue:

@SableBlack,

Without trying it it is difficult to know if it will work and without knowing which clusters it uses even less.
Knowing if it works with any DTH makes it easy to make the prediction

It’s a matter of trying it

1 Like

I’ve just order one and will give it a try, will keep you posted. Also im wondering if it would be possible to add the device shown in the picture below to either of your zigbee multiswitch drivers. Im currently using it with the “Zigbee Multiswitch” DTH. The device picture is also shown.

@SableBlack
Is a doble switch?

@Mariano_Colmenarejo
Both aqara contact and motion are not working and for illuminance it need motion to be updated .
They are stuck at verify, and contact and motion as the cloud sign with a line …

For the sonoff contact sensor i saw maybe something that could solve the problem of showing offline if the sensor as not been trigger for some hours ,

What do you think , is it possible for you to do that for the sonoff contact sensor?
Thank You
Sylvain

It is Mariano, it has two independent relays.

Added to zigbee Multi switch Mc
if not works fine, then I will change to Zigbee Multi Switch Zemismart Mc

  - id: "eWeLink/ZB-SW02"
    deviceLabel: eWeLink ZB-SW02 Switch
    manufacturer: eWeLink
    model: ZB-SW02
    deviceProfileName: two-switch

Thanks Mariano! I’d give it a try. So I’d uninstall the device, install the new driver and then re-add it. Right?

1 Like

I will remove them from the rivers to avoid confusion.

Regarding the sonoff MS01 motion sensor, it is on the official list of beta driver smartthings. If the driver is modified in the battery configuration, it is modified for all devices in the driver.
However, even if you reduce the battery interval time, the report is only sent if there is a minimum change of 1%. I don’t know if this would help solve the problem.

It was more for the sonoff door sensor , sonoff motion sensor seem to be more reliable.
If you think it will not solved the problem then forget it