[Beta] Zigbee Edge Driver compatible with Lidl, Ecosmart, Osram, SmartThings & Others

Ok,

I will add to zigbee light multifunction Mc

Remember that the first time it is paired it will not work.

  • Without uninstalling the bulb, do a HUB reboot from IDE
  • Close the app and if it is android, clear the cache memory
  • When the Hub is online, open the app and device and it should work fine.

If it works well tell me to add it to the list

  - id: "sengled/E11-N1EA"
    deviceLabel: sengled E11-N1EA
    manufacturer: sengled
    model: E11-N1EA
    deviceProfileName: rgbw-level-colortemp-2700-6500

Once again great update! Changing the icon is nice little feature that makes dashboard look better.

1 Like

For some reason after I changed icons all devices drop bottom of the dashboard. If I drag them to the top they have dropped to the bottom when I next time open the app. And only devices with this driver are affected.

If I saw it.
This is because the method to change the icon is to change the complete profile, cannot change only part of the profile accirdung to @nayelyz said.

@milandjurovic71, also saw that with the humidifier, camera and fan profile, the quick automation controls disappear.
This is because It must uses the device type from the metadata too.

It will be necessary to leave only the 3 icons that have a similar profile and category, switch, plug, light.

If they develop another way to do it, it would be better.

We have to take advantage of the beta phase to see what things work and how.

Created Edge Driver Zigbee Switch Power Mc

I have tested it with a samotech switch that I have and it works.

Try to see if it works well.
If it works well tell me and I update the list

Remember that the first time it is paired it will not work.

  • Without uninstalling the switch, do a HUB reboot from IDE
  • Close the app and if it is android, clear the cache memory
  • When the Hub is online, open the app and device and it should work fine.
  - id: "SAMOTECH/MS-104Z"
    deviceLabel: Samotech Switch
    manufacturer: _TYZB01_iuepbmpv
    model: TS0121
    deviceProfileName: switch-power
  - id: "Computime/SLP2b"
    deviceLabel: Computime Plug SLP2b
    manufacturer: Computime
    model: SLP2b
    deviceProfileName: switch-power-plug

1 Like

Added to zigbee Contact Mc with profile contact-battery-profile

  - id: "HiveHom/DWS003 Open/Close Sensor"
    deviceLabel: HiveHom DWS003 Open/Close Sensor
    manufacturer: HiveHome.com
    model: DWS003
    deviceProfileName: contact-battery-profile
1 Like

Added to zigbee Motion Sensor Mc with motion-temp-battery profile.

The battery calculation will be the standard of the remaining percentage, I don’t know if it will work

  - id: "HiveHome-Motion-Sensor"
    deviceLabel: HiveHome Motion-Sensor
    manufacturer: HiveHome.com
    model: MOT003
    deviceProfileName: motion-temp-battery
1 Like

Good evening.
You could add this contact sensor.
I am using the standard smartthings_edge_driver but it often goes offline.

manufacturer: TUYATEC-r9hgssol
model: RH3001

it use profile with contact + battery

Great work Mariano. This driver looking good. Thanks

Hive contact sensor

1 Like

Another one working ok. Thanks
Hive power/meter plug ( computime)

1 Like

Ok. We have an issue with this one.(Hive motion sensor) Motion is permanently on. No automations will work because of this.
The sensor is picking up motion as the light turns green as normal.
Thanks
Ash

Try now, modify the time_Out and I put 20 sec as the ORVIBO

1 Like

@GiacomoF,

Do I add it to the driver of the channel zigbee Contact Mc?

All good Mariano on the hive motion sensor.

Am I ok to ask for drivers for some zigbee yagusmart tuya single light switches.
I can send you the info.

Thank you.

1 Like

Those plugs, which icons I changed yesterday, are unresponsive. Only one plug works, the one which icon I didn’t change. Already restarted hub, deleted cache. Still staying silent. Maybe I just delete and pair them again. :thinking:

@Sakari,

They work for me.

Change to the OLD driver and then change it back to the new one and clear the cache

Send me the information of IDE.
If you have a simple zigbee dimmer?

Now all just went offline. I think it is easier to delete and add them again. And delete the old driver also. There’s only four plugs and one switch to pair.

Adde to Zigbee Contact Mc in Channel

If works fine tell me for update list

  - id: "TUYATEC/r9hgssol Open/Close Sensor"
    deviceLabel: TUYATEC r9hgssol Open/Close Sensor
    manufacturer: TUYATEC-r9hgssol
    model: RH3001
    deviceProfileName: contact-battery-profile

As requested. Zagusmart Tuya zigbee on off light switch.