[Beta] Zigbee Edge Driver compatible with Lidl, Ecosmart, Osram, SmartThings & Others

Devices & Integrations Community Created Device Types
, , ,
#1432

Thank you very much, now the temperature is displayed.

#1434

Another one to you. A Zigbee Switch, also Zemismart. An “old” model rounded touch button TS0001:

photo_2022-01-19_17-09-15
photo_2022-01-19_17-09-15720×1280 16.1 KB

Metrics

  • Last Hop LQI: 120
  • Last Hop RSSI: -70
  • Received Messages From Device: 267
  • Received Messages From Device (Duplicates): 2
  • Messages Transmitted to Device: 139
  • Messages Transmitted to Device (Failures): 0
  • Updated Time: 2022-01-19 4:43 PM BRT

Data

  • application: 40
  • endpointId: 01
  • manufacturer: TUYATEC-dp5y39af
  • model: TS0001
  • onOff: catchall
  • zigbeeNodeType: ROUTER

Raw Description
01 0104 0100 00 05 0000 0003 0004 0005 0006 01 0019

Current States *

  • switch: off
  • checkInterval: 720 s
#1436

Added to this driver version

┌─────────────┬──────────────────────────────────────┐
│ Name        │ Zigbee Switch Mc                     │
│ Version     │ 2022-01-19T21:08:03.562256           │
└─────────────┴──────────────────────────────────────┘

  - id: "TUYATEC-dp5y39af/TS0001"
    deviceLabel: TUYATEC Switch
    manufacturer: TUYATEC-dp5y39af
    model: TS0001
    deviceProfileName: single-switch
#1437

Amazing!
Thanks!!

#1438

A new one. Again Tuya Based, Lumminance sensor, model TS0222

Processing: 16426278318704588366505657727119.jpg…

Data
application:
44
endpointId:
01
manufacturer:
_TYZB01_4mdqxxnn

model:
TS0222

zigbeeNodeType:
SLEEPY_END_DEVICE

Raw Description
01 0104 0106 01 04 0000 0400 0001 0500 02 0019 000A

#1439

I don’t have any illuminance driver.
Ask to @Benjamin_Ginders, who made a driver to illuminance device to see if he can add your device fingerprints

#1440

all right, just posted there. Thaks again!

#1441

Hallo ! Is it possible to do a edge driver to this smarthings siren ?

  • zigbeeNodeType: SLEEPY_END_DEVICE
  • firmwareManufacturerCode: 4401
  • firmwareFullVersion: 15006230
  • application: 15
  • endpointId: 01
  • firmwareImageType: 124
  • manufacturer: Sercomm Corp.
  • model: SZ-SRN12N
    Raw Description 01 0104 0403 00 05 0000 0003 0500 0502 0B05 01 0019

Best regards Markus

#1442

Hello,
Added to this driver version

┌─────────────┬──────────────────────────────────────┐
│ Name        │ Zigbee Siren Mc                      │
│ Version     │ 2022-01-22T16:43:50.441379           │
└─────────────┴──────────────────────────────────────┘

  - id : Sercomm/SZ-SRN12N
    deviceLabel : Sercomm Siren
    manufacturer : Sercomm Corp.
    model : SZ-SRN12N
    deviceProfileName : switch-alarm
#1443

Hi Mariano,
Did you get the time to check this?

#1444

Do you refer to this device?

For this manufacturer, I have write a 1 in the attribute 0x0099 of the cluster 0x0000, as a post that link to me says.

For it to take effect you have to uninstall and reinstall the device with the new version of the driver.

please tell me if it works or not

┌─────────────┬──────────────────────────────────────┐
│ Name        │ Zigbee Multi Switch Zemismart Mc     │
│ Version     │ 2022-01-22T17:23:29.327658           │
└─────────────┴──────────────────────────────────────┘
#1445

Thank you @Mariano_Colmenarejo for your quick reply
Tested and still light goes OFF after 2 mins
I checked and device picked the new driver

#1446

Thank you :+1::+1: works great !

Markus

#1447

Hallo again !

Is it possible to do a edge driver to this aqara vibration / tilt sensor

  • application: 08
  • endpointId: 01
  • manufacturer: LUMI
  • model: lumi.vibration.aq1
  • zigbeeNodeType: SLEEPY_END_DEVICE
    Raw Description 01 0104 000A 01 04 0000 0003 0019 0101 06 0000 0004 0003 0005 0019 0101

Markus

#1448

Because of the clusters it has, I don’t think it will work with any of the drivers I have.
I don’t handle LUMI devices well, there are developers @veonua or @ygerlovin who have drivers for this manufacturer, I don’t know if they can help you with this

#1449

Test with this version.
I wrote 0X0000 in cluster 0x0006, atribute 0x04001 (onTime)

┌─────────────┬──────────────────────────────────────┐
│ Name        │ Zigbee Multi Switch Zemismart Mc     │
│ Version     │ 2022-01-23T18:07:24.327887           │
└─────────────┴──────────────────────────────────────┘
#1450

That is a Tuya-made switch and the turning itself off after two minutes is a known issue for that model with many different brands of hubs, not just smartthings. It only seems to work well out of the box with a tuya-made Gateway.

For example, here’s a discussion over at openhab

The Zigbee standard allows companies to use some custom clusters, and Tuya does so. And they are not required to document those custom clusters. So it can be challenging to get those devices to work with other hubs.

Specifically, some of their switch models have a built in timer and it appears that that is being activated when the device joins the network unless you are using a tuya gateway. :disappointed_relieved:

I suggest you start a new thread with the model number in the topic title and hopefully if anybody else has it working with ST they will let you know how. :thinking:

If you find someone who has it working with a Groovy DTH than that information might be helpful to those who are trying to write edge Drivers.

1 Like
#1451

Okey thanks anyway :+1:

1 Like
#1452

Thanks @JDRoberts for your reply.

This issue is solved in DTH as explened in below post link:

Do you think is something useful to use and modify the driver for this device?

Thanks
Amin

1 Like
#1454

This is the DTH which I am using and in line 271 I have changed to my device