# Battery light switch **URL:** \ **Category:** Devices & Integrations\ **Created:** [October 17, 2016, 8:32pm UTC](https://community.smartthings.com/t/battery-light-switch/60296 "2016-10-17T20:32:32Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Scott\_Barton](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/scott_barton/32/100654_2.png) [@Scott\_Barton](https://community.smartthings.com/u/Scott_Barton)\ **Post date:** [October 17, 2016, 8:32pm UTC](https://community.smartthings.com/t/battery-light-switch/60296/1 "2016-10-17T20:32:32Z")
I’m looking for other options that work similar to the GoControl WA00Z Scene Controller. It’s a battery operated switch that goes over a standard light switch. > **[Amazon.com : GoControl WA00Z-1 Z-Wave Scene-Controller Wall Switch (White) : Camera & Photo](https://www.amazon.com/GoControl-WA00Z-1-Z-Wave-Scene-Controller-Switch/dp/B01BKWG9XS/ref=as_li_ss_tl?ie=UTF8&qid=1476736047&sr=8-2&keywords=z-wave+battery+switch&linkCode=sl1&tag=mytrcomyour09-20&linkId=02b23bc086d4c4486d8c7be08d33f242)** > > The go control smart battery-powered wall switch allows you to add a secondary z-wave scene Controller where you need it most, with simple 'no wires' do-it-yourself installation. The smart battery-pow ... [![](https://images-na.ssl-images-amazon.com/images/I/61s3UtyQ55L._SL1500_.jpg)](http://amzn.to/2eaLlAa) ---
**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\ **Post date:** [October 17, 2016, 8:47pm UTC](https://community.smartthings.com/t/battery-light-switch/60296/2 "2016-10-17T20:47:38Z")
see the buttons FAQ. They’re all listed there. > [@FAQ: Full list of buttons and remotes confirmed to work with SmartThings \[Not all devices listed work with the 2020 Platform\]](https://community.smartthings.com/t/faq-full-list-of-buttons-and-remotes-supported-by-smartthings-at-this-time/9729): > > I’d like to know which buttons and remotes are currently supported or might be supported in the future. Ideally, I’d like to find something similar to the following: [http://www.evolvecontrols.com/devices/control-devices/glass-series](http://www.evolvecontrols.com/devices/control-devices/glass-series) Though alternatively just a simple nice-looking button which actually works unlike this Aeon according to Amazon reviews: [http://www.amazon.com/Touch-Panel-Button-Switch-AL-001/dp/B00GL6B4GG/ref=sr\_1\_3?s=hi&ie=UTF8&qid=1421468320&sr=1-3&keywords=aeon+button](http://www.amazon.com/Touch-Panel-Button-Switch-AL-001/dp/B00GL6B4GG/ref=sr_1_3?s=hi&ie=UTF8&qid=1421468320&sr=1-3&keywords=aeon+button) There is an Aeon Key Fob as well, but it doesn’t seem to be very durable or stylish: What else is available? ---
**Author:** ![Scott\_Barton](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/scott_barton/32/100654_2.png) [@Scott\_Barton](https://community.smartthings.com/u/Scott_Barton)\ **Post date:** [October 28, 2016, 2:14pm UTC](https://community.smartthings.com/t/battery-light-switch/60296/3 "2016-10-28T14:14:27Z")
Ended up going with the [Eaton Aspire Cooper RF9500 battery operated switch](http://amzn.to/2eiEhiB). Notes, the big button is just one button. Doesn’t matter where you push it, it registers as Button1. The small dimmer switch on the side is 2 buttons. Down is Button2 and Up is Button3. Right now it doesn’t register hold button events (just button press), but I think the DT could be updated to handle that? It also doesn’t report battery life. That may also be available once the DT is updated, but I couldn’t figure it out. [![](https://global.discourse-cdn.com/smartthings/original/3X/8/9/8928dacf68d7a9af780dcaa55eb108e922915512.jpeg)](http://amzn.to/2eiEhiB) Device type here > [@\[OBSOLETE\] Aspire Cooper RF9500 Device Type (basic DTH in post 6)](https://community.smartthings.com/t/aspire-cooper-rf9500-device-type/1727/5): > > Hey @urman, I got the switch today and immediately started to pair it with ST. I was able to get it on the paired, however I’m unable to have it function to control any units. I tried the various Zwave device types, and the only one the recognizes any commands was the “Zwave Controller”. The logs says this when ever I select either ON or OFF buttons: BasicReport(value: 1) 6BasicGet() Any ideas? Only documentation I found were here: [http://www.cooperindustries.com/content/dam/public/wiringdevices/products/documents/technical\_specifications/advancedtechinfo\_V2.pdf](http://www.cooperindustries.com/content/dam/public/wiringdevices/products/documents/technical_specifications/advancedtechinfo_V2.pdf)