# Automate existing blinds?

**URL:** <https://community.smartthings.com/t/automate-existing-blinds/196503>\
**Category:** Devices & Integrations\
**Tags:** blinds\
**Created:** [June 7, 2020, 8:33pm UTC](https://community.smartthings.com/t/automate-existing-blinds/196503 "2020-06-07T20:33:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![MikeBadger](https://avatars.discourse-cdn.com/v4/letter/m/e9bcb4/32.png) [@MikeBadger](https://community.smartthings.com/u/MikeBadger)\
**Post date:** [June 7, 2020, 8:33pm UTC](https://community.smartthings.com/t/automate-existing-blinds/196503/1 "2020-06-07T20:33:22Z")

</div>

Heya,

Does anyone know a way to automate existing Venetian blinds? Ideally both the ability to tilt open/close, and to lift up/drop down.

Many thanks,  
Mike

---

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [June 7, 2020, 9:05pm UTC](https://community.smartthings.com/t/automate-existing-blinds/196503/2 "2020-06-07T21:05:20Z")

</div>

Do they have pull cords or twist rods?

---

<div class="post-metadata">

**Author:** ![MikeBadger](https://avatars.discourse-cdn.com/v4/letter/m/e9bcb4/32.png) [@MikeBadger](https://community.smartthings.com/u/MikeBadger)\
**Post date:** [June 7, 2020, 9:18pm UTC](https://community.smartthings.com/t/automate-existing-blinds/196503/4 "2020-06-07T21:18:03Z")

</div>

There are 2 loose cords on one side to control the tilt.

There is one long pull cord on the other side for up/down. However, as you have to pull that cord left to “unlock” (eg. When closing) or pull to right to “lock” (after opening) I’m. It sure how that could be dealt with.

---

<div class="post-metadata">

**Author:** ![denz1968](https://avatars.discourse-cdn.com/v4/letter/d/7cd45c/32.png) [@denz1968](https://community.smartthings.com/u/denz1968)\
**Post date:** [August 9, 2020, 8:18am UTC](https://community.smartthings.com/t/automate-existing-blinds/196503/5 "2020-08-09T08:18:10Z")

</div>

i am also interested in this, did you find a solution

Or does anyone here have any ideas on how to best do this please
