# Alarm Entry Delay using webCoRE

**URL:** <https://community.smartthings.com/t/alarm-entry-delay-using-webcore/117167>\
**Category:** webCoRE\
**Created:** [January 30, 2018, 1:02pm UTC](https://community.smartthings.com/t/alarm-entry-delay-using-webcore/117167 "2018-01-30T13:02:00Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![marktheknife](https://avatars.discourse-cdn.com/v4/letter/m/7feea3/32.png) [@marktheknife](https://community.smartthings.com/u/marktheknife)\
**Post date:** [January 30, 2018, 1:43pm UTC](https://community.smartthings.com/t/alarm-entry-delay-using-webcore/117167/3 "2018-01-30T13:43:28Z")

</div>

Yes, you could certainly create a piston in WebCoRE that could do what you’re asking.

However WebCoRE was created by a community developer and is not officially supported by ST, just like every other community developed smartapp or device handler.

So if you’d like to use WebCoRE for this purpose, or others, go for it. You’re correct that anything could change in the future that will result in a community-developed solution breaking and no longer functioning. But either you can accept that, or go without the functionality that the native ST app lacks.

You should also look into this smartapp that was released several months ago. It works great.

> [@\[Deprecated as of Apr 8, 2018\] Smart Home Monitor Exit and Entry Delays (Version1)](https://community.smartthings.com/t/release-smart-home-monitor-exit-and-entry-delays/95991):
>
> [Version 2.0](https://community.smartthings.com/t/beta-shm-delay-version-2-0/121800) now available Please try out the easier to use [Version2](https://community.smartthings.com/t/beta-shm-delay-version-2-0/121800). Purpose This smartapp simulates the Entry and Exit Delay parameters currently missing in Smart Home Monitor (SHM), allowing for some time on entry to disarm the system, and time to exit the facility without triggering an alarm. Entry and Exit delays operate on contact sensors selected in Delay Profiles. SHM is generally fully armed while using this smartapp, tripping a ‘non-delayed sensor’ immediately triggers a SHM intrusion alert. This means a motion sensor that ‘sees’ a door with a delayed sensor, or ‘sees’ a arming/disarming device such as a keypad, may trigger an intrusion alert while you are arming/disarming the system. Motion sensor issues may be mitigated by specifying the motion sensors in the Delay Profile. A…

---

_[View the full topic](https://community.smartthings.com/t/alarm-entry-delay-using-webcore/117167)._
