# Advice for Scene Controller

**URL:** <https://community.smartthings.com/t/advice-for-scene-controller/22031>\
**Category:** Projects & Stories\
**Created:** [September 8, 2015, 4:44pm UTC](https://community.smartthings.com/t/advice-for-scene-controller/22031 "2015-09-08T16:44:15Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jeff\_McNeal](https://avatars.discourse-cdn.com/v4/letter/j/779978/32.png) [@Jeff\_McNeal](https://community.smartthings.com/u/Jeff_McNeal)\
**Post date:** [September 8, 2015, 4:44pm UTC](https://community.smartthings.com/t/advice-for-scene-controller/22031/1 "2015-09-08T16:44:15Z")

</div>

Hey all,  
I’m new to SmartThings and looking for advice on a scene controller. I’ve got a Great Room with 5 zones (kitchen, LR, DR, sink, island) that will be a combination of GE Z-Wave dimmers, switches and aux switches. I want to put in a scene controller at one end of the great room to, you know, turn on/off different scenes.

Ideally I’d want the scenes stored in SmartThings, and I’d like it to be switch plate sized. It looks like the only compatible device is the Aeon Remote, but that’s not an “installed” look. Any recommendations? Can I get one of the Levito or Enerwave devices to work even thought they’re not officially supported?

Thanks!

---

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [September 8, 2015, 5:02pm UTC](https://community.smartthings.com/t/advice-for-scene-controller/22031/2 "2015-09-08T17:02:59Z")

</div>

The short answer is that because it wants customers to be able to mix zwave and zigbee devices without having to really know which is which, smartthings does not provide support for Z wave scene controllers. So there really aren’t any multibutton scene controllers that work well with the smartthings hub. There is one of the Levitons that works OK for some people, and one of the Enerwaves that works for some people and drives others crazy, but you’re just rolling the dice with both of those.

The option people seem to be happiest with is mounting an inexpensive phone or tablet on Wi-Fi and using smarttiles.click. This is a very nice customizable dashboard app. Developed by a community member, you can try it for free, and then make a contribution if you like it.

[http://www.smarttiles.click](http://www.smarttiles.click)

There’s a forum topic where people share different hardware mounting options they’ve used with it. That might give you some ideas.

> [@Dashboard Theming (Custom CSS) and Mounting Hardware Ideas](https://community.smartthings.com/t/smarttiles-dashboard-theming-and-mounting-hardware-ideas/11222):
>
> Someone else mentioned the idea and I decided to create it. Thanks to @625alex we have a very sweet dashboard. However I want to see others ideas on themes or CSS code they implemented for their setup. Maybe even mounting ideas.

As far as button devices, people seem to have the most luck with the Leviton VRCS4. Note that is not the Leviton VRC **Z** 4, which just doesn’t work with SmartThings. And The one that does work is still a bear to set up. But it probably has the look you want.

> [@\[OBSOLETE\] Leviton VRCS4](https://community.smartthings.com/t/leviton-vrcs4/4748/):
>
> I’ve created a device type for the Leviton Vizia VRCS4 Scene Controller. Because of the way the scene commands work, I essentially turned it into a 4 button remote, 3 if there is a built in relay. Setting it up is a bit of work: Note: buttons are numbered 1-4 and dim, with dim at the bottom. To associate, press and hold buttons 1 and 3 on the VRCS4 for 5 seconds, the LEDs will start to flash amber. Hold the SmartThings Hub near to the device tell the SmartThings app to connect a new device. Note: you tell the device to connect before the hub. The hub should find a ZWave Remote. This will eventually be your scene controller. If you have a load connected to the VRCS4 (hardwired): Go back to the SmartThings app dashboard. Press and hold buttons 2 and 4 on the VRCS4 for 5 seconds. The le…

 ![](https://global.discourse-cdn.com/smartthings/original/3X/c/3/c30b007693b892ca1a3bd12aac24b31d3a383169.jpg)

I personally really like the smartenIT 3 toggle battery-operated switch, very clean look and you can put it anywhere. But it’s only three buttons.

> [@Battery Operated 3 Toggle Switch for wallmount or table top use (SmartenIT ZBWS3B) \[DEPRECATED: STOPPED WORKING IN 2018\]](https://community.smartthings.com/t/battery-operated-3-toggle-switch-for-wallmount-or-table-top-use-smartenit-zbws3b-long-install-faq/13131):
>
> This code stopped working with the 2018 version of the SmartThings app. The device should no longer be considered compatible. Yes, Virginia, there is a battery operated toggle switch that looks like a regular switch and can be used to change modes, run Hello Home Actions, or toggle one or more devices on and off! It does have 3 toggle “buttons” instead of just 1, which some people will see as a negative, but it’s a very nice device. It can be mounted on the wall anywhere, it does not require any wiring. Or it can just lie flat on a table. It’s zigbee, but because SmartThings supports both zigbee and zwave, that doesn’t matter, you can still use it to control any of the devices you control through SmartThings. smile You can also easily feel the separations between the three toggles, …

 ![](https://global.discourse-cdn.com/smartthings/original/3X/1/b/1b409123a6250ea43a90af7248c0dbbdafd51fa8.jpg)

---

<div class="post-metadata">

**Author:** ![Jeff\_McNeal](https://avatars.discourse-cdn.com/v4/letter/j/779978/32.png) [@Jeff\_McNeal](https://community.smartthings.com/u/Jeff_McNeal)\
**Post date:** [September 8, 2015, 5:13pm UTC](https://community.smartthings.com/t/advice-for-scene-controller/22031/3 "2015-09-08T17:13:14Z")

</div>

Okay, good info. That VRCS4 may be an option. I’ll look at that SmartenIT switch too.

Alternatively, If was just looking for an all on/off switch, could I put in an extra z-wave switch there, or even that new Aeon labs glass switch, basically with no load, and have SmartThings listen for pushes to control the others?

---

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [September 8, 2015, 5:16pm UTC](https://community.smartthings.com/t/advice-for-scene-controller/22031/4 "2015-09-08T17:16:17Z")

</div>

> [@Jeff\_McNeal](#):
>
> Okay, good info. That VRCS4 may be an option. I’ll look at that SmartenIT switch too.
> 
> Alternatively, If was just looking for an all on/off switch, could I put in an extra z-wave switch there, or even that new Aeon labs glass switch, basically with no load, and have SmartThings listen for pushes to control the others?

Sure, any switch that the hub can talk to can be put on any circuit, or even a battery operated device, and then you can use it to control anything else that the hub talks to.

Cooper has a battery-operated wall switch that a lot of people like the look of. But if you have a available switchbox and you want to wire something in you can use any switch that is smartthings compatible and that switch can talk to the hub, and then the hub can talk to any of your other devices. They don’t have to be on the same circuit.  
💡 🕶

> [@\[OBSOLETE\] Aspire Cooper RF9500 Device Type (basic DTH in post 6)](https://community.smartthings.com/t/aspire-cooper-rf9500-device-type/1727):
>
> Any one know if the RF9500 works with ST? I’m thinking about getting this in place of an existing wall switch (no neutral) and placing a zwave relay module near the lamp in the ceiling to control it. I’ve also been hearing that Aeon Labs is working on a battery operated switch, but it’s taking awhile (I’m sure theirs will be much fancier). If this works, I may just jump on it since [westwayelectricsupply.com](http://westwayelectricsupply.com) has it on sale for more than half price off (shhh… 10% off ACADEMIC10). If this solves my no neutral issue, I’m going to be ecstatic!

 ![](https://global.discourse-cdn.com/smartthings/original/3X/f/0/f0b818066c23784d79939cfebed88d0d6c08ee86.jpg)

---

<div class="post-metadata">

**Author:** ![Jeff\_McNeal](https://avatars.discourse-cdn.com/v4/letter/j/779978/32.png) [@Jeff\_McNeal](https://community.smartthings.com/u/Jeff_McNeal)\
**Post date:** [September 13, 2015, 12:31am UTC](https://community.smartthings.com/t/advice-for-scene-controller/22031/5 "2015-09-13T00:31:58Z")

</div>

JD, you’ve been very helpful. One last question, if I may? As I haven’t gotten my new SmartThings hub, I can’t research this on my own. I see that there is a GE/Jasco fan controller that has three speeds + off. Can SmartThings react to what speed that guy is set to? For instance, I could listen for a fan speed of Low and trigger a “dinner mode”, Medium for “normal mode” and high for “superbright mode”?

---

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [September 13, 2015, 12:42am UTC](https://community.smartthings.com/t/advice-for-scene-controller/22031/6 "2015-09-13T00:42:04Z")

</div>

> [@Jeff\_McNeal](#):
>
> JD, you’ve been very helpful. One last question, if I may? As I haven’t gotten my new SmartThings hub, I can’t research this on my own. I see that there is a GE/Jasco fan controller that has three speeds + off. Can SmartThings react to what speed that guy is set to? For instance, I could listen for a fan speed of Low and trigger a “dinner mode”, Medium for “normal mode” and high for “superbright mode”?

I would think so, that’s basically how smartapps like “dim with me” work, but I don’t know the exact methods as I no longer read code. (I depend on text-to-speech software, and reading groovy with text to speech is very difficult.) @tgauchat or @bravenel or one of the other master coders should know. 🕶

---

<div class="post-metadata">

**Author:** ![bravenel](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/bravenel/32/13223_2.png) [@bravenel](https://community.smartthings.com/u/bravenel)\
**Post date:** [September 13, 2015, 12:46am UTC](https://community.smartthings.com/t/advice-for-scene-controller/22031/7 "2015-09-13T00:46:55Z")

</div>

> [@Jeff\_McNeal](#):
>
> For instance, I could listen for a fan speed of Low and trigger a “dinner mode”, Medium for “normal mode” and high for “superbright mode”?

In theory this will work. I say it that way because I don’t think the fan switch reports very quickly. I don’t have a GE/Jasco fan controller, all of mine are Leviton.

A smartapp could subscribe to the fan switch `setLevel` event, and then take actions based on the value of `level` that comes back, as you are thinking.

Are you thinking of trying to use one of these without a fan, just as a “scene chooser”?

EDITED TO ADD:

Any dimmer could do this, you wouldn’t need a fan controller. You can just arbitrarily say that 1 to 33 is one scene, 34 to 66 is another, and 67 to 99 is yet another, with off being off. Not sure that trying to set a dimmer from the physical switch is going to work too well. You might want to look at some of the other scene controllers (@JDRoberts has a writeup about them), as the ergonomics are probably better.
