OK… You will have to create “Virtual on/off Tiles” from the web IDE if you want access to all of the “switches” If you want to map the “pool light” (switchX) to a real existing switch you can do that too with the app attached… If you would like a special virtual tile for the pool with different colors other than white/green I can get you one of those too (just a modified device type)…
Here you go - create a new SmartApp and then copy/paste this into the whole thing. Save it and you will be good to go. Let mw know if you need any help
Cooper
/**
- Multi Switch to Virtual Tiles or Switches
- Copyright 2014 Cooper Lee
- Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except
- in compliance with the License. You may obtain a copy of the License at:
-
http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- for the specific language governing permissions and limitations under the License.
*/
definition(
name: “Multi Switch to Virtual Tiles or Switches”,
namespace: “ms_2_vt”,
author: “Cooper Lee”,
description: “Use this app to map multiple switches embedded in a device type to a variety of virtual tiles or real switches.”,
category: “My Apps”,
iconUrl: “http://www.scimonocesoftware.com/seefinance/images/icons_as_jpg/Switch.jpg”,
iconX2Url: “http://www.scimonocesoftware.com/seefinance/images/icons_as_jpg/Switch.jpg”,
iconX3Url: “http://www.scimonocesoftware.com/seefinance/images/icons_as_jpg/Switch.jpg”)
preferences {
page(name: “mainDevice”, uninstall: true, install:false)
page(name: “virtualDetails”, uninstall: true, install:true)
}
def mainDevice() {
dynamicPage(name: “mainDevice”, title: “Setup virtual app and multi-switch device”, nextPage: “virtualDetails”, uninstall: true, install:false) {
section {
input “master”, “capability.switch”, multiple: false, required: true, title: “Choose the device with multiple switches”
label title: "Assign a name for this virtual tile handler", required: false
icon title: "Choose an icon for $app.label", required: false, defaultValue: "st.Lighting.light13-icn"
paragraph: "Assign switches to virtual tiles or real switches on next page"
}
}
}
def virtualDetails() {
dynamicPage(name: “virtualDetails”, title: “How to map switches:”, uninstall: true, install:true) {
section {
input “switch1”, “capability.switch”, multiple: true, required: false, title: "Switch Mapping 1"
input “switch2”, “capability.switch”, multiple: true, required: false, title: "Switch Mapping 2"
input “switch3”, “capability.switch”, multiple: true, required: false, title: "Switch Mapping 3"
input “switch4”, “capability.switch”, multiple: true, required: false, title: "Switch Mapping 4"
input “switch5”, “capability.switch”, multiple: true, required: false, title: "Switch Mapping 5"
input “switch6”, “capability.switch”, multiple: true, required: false, title: "Switch Mapping 6"
input “switch7”, “capability.switch”, multiple: true, required: false, title: "Switch Mapping 7"
input “switch8”, “capability.switch”, multiple: true, required: false, title: "Switch Mapping 8"
input “switch9”, “capability.switch”, multiple: true, required: false, title: "Switch Mapping 9"
input “switch10”, “capability.switch”, multiple: true, required: false, title: “Switch Mapping 10”
}
}
}
def installed() {
subscribe(switch1, “switch”, swch1)
subscribe(switch2, “switch”, swch2)
subscribe(switch3, “switch”, swch3)
subscribe(switch4, “switch”, swch4)
subscribe(switch5, “switch”, swch5)
subscribe(switch6, “switch”, swch6)
subscribe(switch7, “switch”, swch7)
subscribe(switch8, “switch”, swch8)
subscribe(switch9, “switch”, swch9)
subscribe(switch10, “switch”, swch10)
}
def updated() {
unsubscribe()
subscribe(switch1, “switch”, swch1)
subscribe(switch2, “switch”, swch2)
subscribe(switch3, “switch”, swch3)
subscribe(switch4, “switch”, swch4)
subscribe(switch5, “switch”, swch5)
subscribe(switch6, “switch”, swch6)
subscribe(switch7, “switch”, swch7)
subscribe(switch8, “switch”, swch8)
subscribe(switch9, “switch”, swch9)
subscribe(switch10, “switch”, swch10)
}
def swch1(evt) { master."${evt.value}1"() }
def swch2(evt) { master."${evt.value}2"() }
def swch3(evt) { master."${evt.value}3"() }
def swch4(evt) { master."${evt.value}4"() }
def swch5(evt) { master."${evt.value}5"() }
def swch6(evt) { master."${evt.value}6"() }
def swch7(evt) { master."${evt.value}7"() }
def swch8(evt) { master."${evt.value}8"() }
def swch9(evt) { master."${evt.value}9"() }
def swch10(evt) { master."${evt.value}10"() }